Noctua NT-H2 3.5g, Thermal Computer Paste incl. 3 Cleaning Wipes (3.5g)
-
Mjkol95
> 24 hourLho presa perché consigliata da un amico e devo dire che è ottima. Capacità di condurre le temperature fantastica e soprattutto un ottima qualità prezzo visto tutto il necessario fornito nella scatola (Pad per rimuovere la pasta termica vecchia incluso)
-
Corrado
> 24 hourComprata per sostituire la pasta termica preapplicata sul dissipatore originale di un ryzen5 5600x. Da subito ho notato una diminuzione delle temperature da un minimo di 5 gradi a un massimo di 10 a seconda dellutilizzo della CPU. Ottimo.
-
Jose
> 24 hourTodo perfecto
-
EMJ
> 24 hourExcellente pâte thermique.
-
Javier
> 24 hourPerfecto
-
Amzn Cstmr Mike
> 24 hourBought this to replace the original thermal paste on my 10 year old laptop. It worked wonders and is keeping the CPU temps under control. Application was simple and was easy to use.
-
Nik Kershaw
> 24 hourHat bei meinem DELL XPS 13 bis zu 7°C bei idle und Peak-Temperatur gebracht. Kann es nur empfehlen! Bestes Upgrade zum kleinen Preis.
-
Nico
> 24 hourOttima pasta termoconduttiva secondo me tra le migliori senza dubbio (tra quelle non a metallo liquido) l’ho applicata sia su CPU che GPU. Mi ha permesso di far scendere le temperature su CPU di 5-6 gradi in overclocking a 4.5 GHZ possiedo un I7 4790K e su GPU Asus Strix GTX 1080ti OC di 4-5 gradi. Ho preferito spalmarla sia su CPU e GPU in quanto secondo me resta più omogenea che il classico chicco di riso al centro ho trovato un po’ di difficoltà nel distenderla al meglio possibile ma basta applicarne una piccola quantità in più e ci si riesce in maniera efficiente (anche se accidentalmente la pasta fuoriesce in qualche componente del pc non lo danneggia in quanto è anticorrosiva e non ha conducibilità elettrica). Buona la confezione con le tre salviettine deumidificate per togliere la vecchia pasta termoconduttiva. Prezzo un po’ alto ma ne vale la pena e poi la siringa è abbastanza per più applicazioni. Sulla confezione c’è scritto che la pasta è efficiente fino a 5 anni dall’applicazione. Ottimo il servizio Amazon. Secondo me è migliore della MX-4 edizione 2019. Arrivata sigillata nella sua confezione originale. Il prodotto è made in Taiwan ma naturalmente è stato progettato in Austria da Noctua.
-
bodineau
> 24 hourChangement de la pâte dorigine dune Ps4 slim par celle ci et nickel finit la piste de décollage dans mon salon.
-
giltesa
> 24 hourCalidad excepcional, lo mejor de todo es que con una jeringa he podido cambiar la pasta de un NAS, mi PC, y una Nintendo Swithc Lite... y aun me queda (aunque no sé cuanta mas pues la pegatina me impide verlo).
NT-H2 is the further improved second generation of Noctua’s award-winning hybrid thermal compound. Combining the iconic NT-H1’s proven features, superb ease-of-use and renowned long-term stability with a novel, fine-tuned formula of micro particles for even better thermal performance, NT-H2 is an enthusiast-grade paste for the highest demands. Whether it’s air- or water-based cooling, CPU or GPU applications, overclocking or silent systems: NT-H2 will consistently deliver outstanding results and thanks to the included cleaning wipes, it is just as easy to remove as to apply.
Next-generation performance
Further improving the award-winning NT-H1, NT-H2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.
|
|
|
|
|
|---|---|---|---|
Easy to clean with included wipesThe 3.5g pack of NT-H2 includes three large NA-CW1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: Simply wipe off the paste from the CPU and the base of the cooler using one of the wipes and you’re done! |
Not electrically conductive, non-corrodingWhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with NT-H2 and it’s completely safe to use with any type of CPU cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not. |
Excellent long-term stabilityNT-H2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the CPU for 5 years or more. |
3.5g package for 3-20 applicationsSufficient for around 3-20 applications (depending on the size of the CPU or GPU, e.g. around 3 applications for large CPUs such as TR4 and around 20 for small CPUs such as LGA1151), the classic 3.5g packaging size is ideal for most users who only install coolers every now and then. |
Easy to apply
Thanks to its excellent spreading properties, there is no need to manually spread NT-H2 before installing the cooler: Simply apply some paste onto the CPU (see instructions for details), put on the heatsink and you’re ready to go!
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NT-H1 3.5g | NT-H1 3.5g SW Edition | NT-H1 10g | NT-H2 3.5g | NT-H2 10g | NA-SCW1 | |
| Description: | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Further improved second generation thermal compound | Further improved second generation thermal compound | Cleaning wipes for removing thermal compound |
| Weight/Size: | 3.5g | 3.5g | 10g | 3.5g | 10g | 15x12cm |
| Volume: | 1,4 ml | 1,4 ml | 4,0 ml | 1,2 ml | 3,6 ml | - |
| Density: | 2,49 g/cm³ | 2,49 g/cm³ | 2,49 g/cm³ | 2.81 g/cm³ | 2.81 g/cm³ | - |
| NA-CW1 Wipes: | - | 3x included | - | 3x included | 10x included | 20x included |
| Spatula Included | X | ✓ | X | X | X | X |
Related products
