Noctua NT-H2 3.5g, Thermal Computer Paste incl. 3 Cleaning Wipes (3.5g)
-
Mr T
> 3 dayUsed it and, havent blown up yet, so good
-
Pampam53
> 3 dayDe la qualité comme dhabitude
-
Basso Marco
> 3 dayHo sempre utilizzato la Artic MX-4 anche in versione nuova e ho voluto provare questa volta la Noctua NT-H2, più che altro incuriosito dalla novità. Dal punto di vista prestazionale/termico forse è leggermente migliore della MX-4 (ma parliamo secondo me di 1-2°C se siete fortunati). Dal punto di vista della facilità dapplicazione è la medesima della MX-4. Parlando di durata non lo so in quanto devo ancora verificarla. Sicuramente il confezionamento e la presenza di salviette pre-umidificate con alcool è un fattore che va a favore della Noctua ma non è indispensabile. A conti fatti lesborso maggiore di soldi per questa pasta non so se ne vale la candela.
-
Leonel Funk DDS
Greater than one weekHa llegado rápido y el aplicador es genial. Lo he usado y funciona perfecto
-
Rich_D
> 3 dayIts industry standard Noctua, whats not to like? Havent used any of this tube as of yet, bought it to have on hand if I needed to re paste CPU or Vid Card Cooler.
-
Cody B.
> 3 dayWorks great and lots in tube for other applications.
-
Piske
Greater than one weekOttime prestazioni sia su cpu che gpu, servizio impeccabile
-
Dr. Dante Bechtelar II
> 3 dayLove this paste! Repadded and paste my 6700xt after some thought that i could get it a little bit cooler. I use my gpu mainly for gaming and occasionally for mining. Overall from stock paste and pads to the new stuff i put in, mem temps dropped 7 degrees celsius and chip hot spot dropped 5 degrees celsius. First time using this product and will confidently continue to use and recommend this paste.
-
Tyler B
> 3 dayA product-improved version of the NT-H1. Easy to apply, easy to remove, non-conductive, and very high performance. This is up there with Grizzly Kryonaut and Gelid GC-Extreme in testing. To get anything measurably better you would need to go with conductive liquid metal thermal mediums like Conductonaut. Those are much higher risk of failure and much more difficult to work with, not worth it in anything beyond extreme overclocking applications. Cant give a temp comparison because I didnt use the stuff they sent with my Contac Silent 12 heatsink, immediately cleaned and applied the NT-H2 to it. Under a 20min stress test it never went above 70c with default fan curve, impressive for a quiet heatsink meant to keep decibels low more than keeping temps down while gaming.
-
Enrique
22-11-2024Es muy poco tiempo para valorar su funcionamiento, solo puedo decir que la compu y el procesador donde lo use ya no se congelan como lo hacían antes de aplicarlo.. La atención del vendedot fue atenta y respondió rápido a mi pregunta.
NT-H2 is the further improved second generation of Noctua’s award-winning hybrid thermal compound. Combining the iconic NT-H1’s proven features, superb ease-of-use and renowned long-term stability with a novel, fine-tuned formula of micro particles for even better thermal performance, NT-H2 is an enthusiast-grade paste for the highest demands. Whether it’s air- or water-based cooling, CPU or GPU applications, overclocking or silent systems: NT-H2 will consistently deliver outstanding results and thanks to the included cleaning wipes, it is just as easy to remove as to apply.
Next-generation performance
Further improving the award-winning NT-H1, NT-H2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.
|
|
|
|
|
|---|---|---|---|
Easy to clean with included wipesThe 3.5g pack of NT-H2 includes three large NA-CW1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: Simply wipe off the paste from the CPU and the base of the cooler using one of the wipes and you’re done! |
Not electrically conductive, non-corrodingWhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with NT-H2 and it’s completely safe to use with any type of CPU cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not. |
Excellent long-term stabilityNT-H2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the CPU for 5 years or more. |
3.5g package for 3-20 applicationsSufficient for around 3-20 applications (depending on the size of the CPU or GPU, e.g. around 3 applications for large CPUs such as TR4 and around 20 for small CPUs such as LGA1151), the classic 3.5g packaging size is ideal for most users who only install coolers every now and then. |
Easy to apply
Thanks to its excellent spreading properties, there is no need to manually spread NT-H2 before installing the cooler: Simply apply some paste onto the CPU (see instructions for details), put on the heatsink and you’re ready to go!
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NT-H1 3.5g | NT-H1 3.5g SW Edition | NT-H1 10g | NT-H2 3.5g | NT-H2 10g | NA-SCW1 | |
| Description: | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Further improved second generation thermal compound | Further improved second generation thermal compound | Cleaning wipes for removing thermal compound |
| Weight/Size: | 3.5g | 3.5g | 10g | 3.5g | 10g | 15x12cm |
| Volume: | 1,4 ml | 1,4 ml | 4,0 ml | 1,2 ml | 3,6 ml | - |
| Density: | 2,49 g/cm³ | 2,49 g/cm³ | 2,49 g/cm³ | 2.81 g/cm³ | 2.81 g/cm³ | - |
| NA-CW1 Wipes: | - | 3x included | - | 3x included | 10x included | 20x included |
| Spatula Included | X | ✓ | X | X | X | X |
Related products
