Noctua NT-H2 3.5g, Thermal Computer Paste incl. 3 Cleaning Wipes (3.5g)
-
Xander
> 3 dayBrought my temps down a considerable amount from the NT-H1 that was supplied, granted my initial application wasnt great.
-
mas71ph
> 3 dayProdotto unico e funzionale non so se è il dissipatore Noctua o la pasta ma entrabi hanno reso il mio i7 7700K GLACIALE!!!!!!!!
-
Edward Acosta
Greater than one weekWorks well. Not too runny so easy to clean. Took 10+ degrees off temps of my GPU compared with the stock paste.
-
Taj
> 3 dayThis, Kryonaut, and Conductonaut are the three best TIMs you can get right now. Compared to Kryonaut, this stuff is a bit runny. It will firm up a bit after a few heat cycles and doesnt carry the risks associated with a bad Conductonaut application. Make sure that when you apply your heatsink that you do it as level as possible and torque the retention mechanism as evenly as possible. It will spread itself out and push out any air bubbles, not necessary to do the older painted surface method.
-
Orlando f.
Greater than one weekYa estaba usado yo creo que solo lo usaron para una sola ocasión y lo devolvieron viene con las tres toallas para limpiar
-
Lorenzo
> 3 dayApplicazione semplicissima, spiegazioni chiare (niente italiano ), non ho termini di comparazione ma il mio i9900k sta normalmente sui 35 gradi
-
fefè
> 3 dayProdotto facile da distribuire sulla superficie del processore, prestazioni entro la media di altri marchi forse 1un grado in meno della artic mx4 che avevo precedentemente.Consiglio lacquisto a patto che il prezzo sia un po più contenuto
-
BrandonH
> 3 dayCools my CPU just fine. Went from 70-80C to 60-65C after cleaning out the old paste. Definitely not the actual difference in temps but the peace of mind helps :)
-
Javier Gomez Hernandez
> 3 dayFunciona bien pero a la hora de ponerla en el procesador si la quieres extender cuesta mucho en cuanto al precio algo cara para lo que es
-
George G.
> 3 dayAfter some serious overclocking for just over 3 years, I was having my RTX 2060 GPU card lock up or freeze and needing to reboot my PC. I took out the GPU and separated the cooler from the PCB and found that the original paste was dried out, and also the thermal pads that were used by the factory were just barely making contact with the memory chips. I reapplied fresh thermal paste (Noctua NT-H2 Pro-Grade thermal paste) to the GPU and replaced the thermal pads with a 12.8 W/mK that was 0.5 mm thicker and reassembled the GPU card and reinstalled it. I was astonished to find that my RTX 2060 GPU was running 20॰C COOLER when it was overclocked at the same rate.
NT-H2 is the further improved second generation of Noctua’s award-winning hybrid thermal compound. Combining the iconic NT-H1’s proven features, superb ease-of-use and renowned long-term stability with a novel, fine-tuned formula of micro particles for even better thermal performance, NT-H2 is an enthusiast-grade paste for the highest demands. Whether it’s air- or water-based cooling, CPU or GPU applications, overclocking or silent systems: NT-H2 will consistently deliver outstanding results and thanks to the included cleaning wipes, it is just as easy to remove as to apply.
Next-generation performance
Further improving the award-winning NT-H1, NT-H2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.
|
|
|
|
|
|---|---|---|---|
Easy to clean with included wipesThe 3.5g pack of NT-H2 includes three large NA-CW1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: Simply wipe off the paste from the CPU and the base of the cooler using one of the wipes and you’re done! |
Not electrically conductive, non-corrodingWhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with NT-H2 and it’s completely safe to use with any type of CPU cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not. |
Excellent long-term stabilityNT-H2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the CPU for 5 years or more. |
3.5g package for 3-20 applicationsSufficient for around 3-20 applications (depending on the size of the CPU or GPU, e.g. around 3 applications for large CPUs such as TR4 and around 20 for small CPUs such as LGA1151), the classic 3.5g packaging size is ideal for most users who only install coolers every now and then. |
Easy to apply
Thanks to its excellent spreading properties, there is no need to manually spread NT-H2 before installing the cooler: Simply apply some paste onto the CPU (see instructions for details), put on the heatsink and you’re ready to go!
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NT-H1 3.5g | NT-H1 3.5g SW Edition | NT-H1 10g | NT-H2 3.5g | NT-H2 10g | NA-SCW1 | |
| Description: | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Further improved second generation thermal compound | Further improved second generation thermal compound | Cleaning wipes for removing thermal compound |
| Weight/Size: | 3.5g | 3.5g | 10g | 3.5g | 10g | 15x12cm |
| Volume: | 1,4 ml | 1,4 ml | 4,0 ml | 1,2 ml | 3,6 ml | - |
| Density: | 2,49 g/cm³ | 2,49 g/cm³ | 2,49 g/cm³ | 2.81 g/cm³ | 2.81 g/cm³ | - |
| NA-CW1 Wipes: | - | 3x included | - | 3x included | 10x included | 20x included |
| Spatula Included | X | ✓ | X | X | X | X |
