Noctua NT-H2 3.5g, Thermal Computer Paste incl. 3 Cleaning Wipes (3.5g)
-
George G.
> 3 dayAfter some serious overclocking for just over 3 years, I was having my RTX 2060 GPU card lock up or freeze and needing to reboot my PC. I took out the GPU and separated the cooler from the PCB and found that the original paste was dried out, and also the thermal pads that were used by the factory were just barely making contact with the memory chips. I reapplied fresh thermal paste (Noctua NT-H2 Pro-Grade thermal paste) to the GPU and replaced the thermal pads with a 12.8 W/mK that was 0.5 mm thicker and reassembled the GPU card and reinstalled it. I was astonished to find that my RTX 2060 GPU was running 20॰C COOLER when it was overclocked at the same rate.
-
Adrián
> 3 dayEs la mejor pasta que he probado hasta el momento, bajo las temperaturas de mi laptop de 95 a 65. Vale cada centavo
-
jan schapdick
> 3 dayAlter pc neue Temperatur
-
Payton Humphrey
> 3 dayI used NT-H2 in my system and it was a good consistency. Not too liquidy like other premium thermal compounds that I’ve used. Very happy with the product. The alcohol wipes are a very nice touch too.
-
Tony
> 3 daypasta teremica ottima
-
Praveen Gandi
> 3 dayI tried several thermal compounds and even liquid metal (it generated a slight vibration). But this Noctual NT-H2 is brilliant. Instantly dropped 5c and even eliminated a lot of noise from the cooler.
-
Daniel James Bowman
> 3 dayDoes a good job spreads easy and holds take a bit to cure
-
Laura H.
Greater than one weeki9-9900K oc à 5 ghz jai monté un watercooling h60i de chez corsair ou jai installé 2 ventilateur de 12 cm noctua 3000 rpm, en cg jai une RTX 2070 evga oc par moi même, breff parlon des températures sans la pâte thermique je tournais sur cod wm à : cpu 78 °c et la cg à 58 °c. Maintenant avec la pâte nt-h2 sur cod wm cpu 65°c et la cg à 53 °c. Donc je peux vous dire que vous pouvez acheté cette pâte les yeux fermé après on verra avec le temps mais je suis plus que satisfait noctua valeur sur
-
KVince
> 3 dayI swapped the pre applied paste from my Corsair H150i for this stuff and my Ryzen 5 3600 temps dropped by 15 degrees!
-
gaz
> 3 dayGood kit lowered temps by 5c over artic equivalent
NT-H2 is the further improved second generation of Noctua’s award-winning hybrid thermal compound. Combining the iconic NT-H1’s proven features, superb ease-of-use and renowned long-term stability with a novel, fine-tuned formula of micro particles for even better thermal performance, NT-H2 is an enthusiast-grade paste for the highest demands. Whether it’s air- or water-based cooling, CPU or GPU applications, overclocking or silent systems: NT-H2 will consistently deliver outstanding results and thanks to the included cleaning wipes, it is just as easy to remove as to apply.
Next-generation performance
Further improving the award-winning NT-H1, NT-H2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.
|
|
|
|
|
|---|---|---|---|
Easy to clean with included wipesThe 3.5g pack of NT-H2 includes three large NA-CW1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: Simply wipe off the paste from the CPU and the base of the cooler using one of the wipes and you’re done! |
Not electrically conductive, non-corrodingWhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with NT-H2 and it’s completely safe to use with any type of CPU cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not. |
Excellent long-term stabilityNT-H2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the CPU for 5 years or more. |
3.5g package for 3-20 applicationsSufficient for around 3-20 applications (depending on the size of the CPU or GPU, e.g. around 3 applications for large CPUs such as TR4 and around 20 for small CPUs such as LGA1151), the classic 3.5g packaging size is ideal for most users who only install coolers every now and then. |
Easy to apply
Thanks to its excellent spreading properties, there is no need to manually spread NT-H2 before installing the cooler: Simply apply some paste onto the CPU (see instructions for details), put on the heatsink and you’re ready to go!
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NT-H1 3.5g | NT-H1 3.5g SW Edition | NT-H1 10g | NT-H2 3.5g | NT-H2 10g | NA-SCW1 | |
| Description: | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Renowned premium-grade thermal compound | Further improved second generation thermal compound | Further improved second generation thermal compound | Cleaning wipes for removing thermal compound |
| Weight/Size: | 3.5g | 3.5g | 10g | 3.5g | 10g | 15x12cm |
| Volume: | 1,4 ml | 1,4 ml | 4,0 ml | 1,2 ml | 3,6 ml | - |
| Density: | 2,49 g/cm³ | 2,49 g/cm³ | 2,49 g/cm³ | 2.81 g/cm³ | 2.81 g/cm³ | - |
| NA-CW1 Wipes: | - | 3x included | - | 3x included | 10x included | 20x included |
| Spatula Included | X | ✓ | X | X | X | X |
