OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
JohnH
Greater than one weeksuper fast and easy install, makes adding a ssd to s 2008-2013 mac pro a snap!
-
Dana Fiorucci
> 3 dayWorked great to install SSD into 2009 Mac Pro.
-
Frank C. Okusako
> 3 dayI like the simplicity of this device. Really easy to put together. Nice fit, too.
-
Vincent
> 3 dayWorked great easy to install
-
Zadie
> 3 dayI needed to modify some card positions in the main chamber of the Mac Pro 5,1. Because of its thickness and heft I was able to drill and cut the sled to accommodate my changes. And of course, the sled also works just fine without any modification. Great Product and fast delivery.
-
Joe Brown
> 3 dayPerfect fit
-
bcoverss
17-11-2024Very high quality.
-
csquier
> 3 dayI found this to be a better option than the Newer Tech Adaptadrive solution as this connects the drive directly to the logic board. No bridge connector, which I found to have a rather high failure rate for me. Ive had mixed luck with OWC products but this seems to be a solid solution.
-
Matt King
> 3 dayI should’ve more closely read the description, because it does not state that it works with 2008 MP models, but it sticks out too far to put the side panel back on. This is my 2008 MP 3,1. It’s a well made product, and actually fits the tray slot, and fits the drive just fine, it just sits out about 1/2” too long on the end.
-
Johnny Mac
> 3 dayWell made, they appear to be a casting but still very rigid and they fir the MacPro perfectly. I used one to put a Hynix Gold SSD boot drive in one of my older Mac Pros I use for an old simulator box. Big improvement! These blue trays are a bit pricey like most OWC stuff, but everything aligns well with no problems. If you are installing quality parts, these are a nice bit to finish off your project.
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
