OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
Hassan ali
> 24 hourit didi not fit well as it is long and its not really fit inside the mac pro case box .
-
SAK
> 24 hourWorks Great!
-
Stephanie & David H
> 24 hourThis was easy to install. Had absolutely no problem with this sled. Came with mounting screws, so it’s an all-in-one solution.
-
Test4echo3
> 24 hourWorks as advertised!
-
Stor_traveler
> 24 hourEverything to like, nothing to not like, it just works.
-
Darin Hadley
> 24 hourLove this! Was able to install a 2.5 SSD in my Mac Pro no problems!
-
csquier
> 24 hourI found this to be a better option than the Newer Tech Adaptadrive solution as this connects the drive directly to the logic board. No bridge connector, which I found to have a rather high failure rate for me. Ive had mixed luck with OWC products but this seems to be a solid solution.
-
Papillon
> 24 hourWorks perfectly in my 2010 Mac Pro, would buy again!
-
Jeremy R.
> 24 hourI like these drive sleds but they are overly expensive for what you are getting. I wish they were half the price I paid as I have found cheaper options.
-
PEMarston Films
> 24 hourWorks great!
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
