OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
EFREN TOLEDANO GUZMAN
> 24 hourWell fit perfect for my expectations, the color could be on more than one , red, yellow, green or polished aluminum why not?!!!
-
tee
> 24 hourExcellent product.
-
WW
> 24 hourAlles bestens, genau das was ich gesucht habe. Mittlerweile 4 stk, da unglaublich praktisch.
-
aserbant
> 24 hourGreat accessory, but if youre price conscious you should probably buy this directly from OWC. No issues installing multiple SSDs in my 09 Mac Pro.
-
Jesse
> 24 hourQuality product for use in my Mac Pro 5,1.
-
Tallman
> 24 hour2010-2012 Mac Pro computers can run Sierra and High Sierra quite nicely with the read/write speed boost of an SSD. Add a compatible graphics card (Radeon RX 580) and Mojave is an option. The OWC 2.5” sled is the easiest way to go.
-
Wing Hong Louie
> 24 hourworks great
-
Stephanie & David H
> 24 hourThis was easy to install. Had absolutely no problem with this sled. Came with mounting screws, so it’s an all-in-one solution.
-
Tbjo
> 24 hourI found the product quality to be as advertised and consistent with the description.
-
Michael R.
> 24 hourLove these Barckets absolutely excellent Fit and Finish at a Reasonable price and Fast shipping
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
