OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
Yeah Right
> 3 dayThis is a solid product. It fits just like the factory sleds for hard drives. I bought this to replace another product that was garbage in my opinion.
-
Johnathan Ilac
> 3 dayWorks perfectly as intended. No issues with installation.
-
Brandon Barr
> 3 dayEasy to use and fit 2010 Mac Pro perfectly
-
Rich
> 3 dayOWC Mount Pro 2.5 Drive Sled is great.
-
Prof. April Collins
> 3 dayWorks Great!!
-
Schmidel McGrödel, Esq.
> 3 dayThis is the best tray for 2.5 drives in a Mac Pro, but consider NVMe SSD for more speed instead.
-
Johnny Mac
> 3 dayWell made, they appear to be a casting but still very rigid and they fir the MacPro perfectly. I used one to put a Hynix Gold SSD boot drive in one of my older Mac Pros I use for an old simulator box. Big improvement! These blue trays are a bit pricey like most OWC stuff, but everything aligns well with no problems. If you are installing quality parts, these are a nice bit to finish off your project.
-
Stephanie & David H
> 3 dayThis was easy to install. Had absolutely no problem with this sled. Came with mounting screws, so it’s an all-in-one solution.
-
Vissal Mathew
> 3 dayfit and function. good quality too.
-
ITEOTB
> 3 dayGreat item
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
