The materials used to manufacture this mount are plenty sturdy, matching the quality of 2 other mounts Ive installed. All the hardware you need for mounting is supplied and I had no trouble finding the correct size screws for my 21 monitor. They also supply a mini level and an allen wrench for some of the adjustments. There is an upper bolt that attaches the VESA plate to the swing arm that requires a 15mm socket wrench to turn. The screws into the wall need an 11mm socket. The instructions give equivalent non-metric sizes if you need that. I thought the instructions were pretty good, not like some of those pictures-only instructions you end up with sometimes, these were written in 6 different languages and the English was clear. One thing to make sure of is that you drill the correct size pilot hole for the wall screws. I accidentally flipped to the page for mounting onto a brick wall, but figured that out when I realized the pilot hole would be bigger than the screw, because on that page you are drilling for a wall anchor. Flipping back a page to the stud wall install, I got the correct pilot hole size. Kudos to them for listing the pilot hole size too, lots of times you are left guessing what size hole to drill. Probably some of the most complete instructions Ive ever seen. Even the bag with the screws and anchors has a warning on it to only use the anchors in masonry. With my monitor up off my desk, Im super happy with this.

Works well, moves as desired and easy to install. Happy with my purchase.

Easy to install, very sturdy and works very well. I would recommend this if you need a swivel, adjustable mount.

It’s a decent mount for the money, but the dimensions shown are incorrect. My viewing angle is 90 degrees to the wall the mount is attached to. The arms are an inch longer than shown, so I had to screw a 2 x 4 to the wall. It’s in my garage so I don’t mind the red neck look.

I like this mount but you want to try to size it right. I thought I would like the ability to use this for any size VESA mount but the wings included are kind of a pain to put on. Attaching the plate to the arm is pretty easy, but tightening it down was a pain. Then adjusting the tilt is easy enough but the screws there are really tight. I had to tighten them even more to keep the tilt locked in. The kit came with everything you would need, including spacers. I thought it was kind of funny that the instructions had an option for installing it on a TV with a bump out on the bottom when the mount is so adjustable. It can come out nearly 20 inches. I guess if you want to use this mount and make it flush against the wall you would need that. Its very functional but took longer than I expected to set up.

Easy to install & works great

I really like this mount, and around the $25 mark, its an incredibly good deal. The overall build quality is good, the fit and finish is great, and the included hardware is fantastic. Heck, I even like that it includes a little mini level. I have my own level, but I wound up using the included one because its small enough where I could actually do the entire install on my own, unlike had I used my own 3 level. Everything moves nice and smoothly, and I also like that once you have all the hardware installed and the arm on the wall, you basically just drop the TV onto the arm and snug down a couple bolts- no fiddling around with aligning an entire mount while holding the TV over your head!

I ordered this to mount up a 32-inch Toshiba Smart TV now thats quite a cheese that was purchased from Best Buy for the kids for Christmas. The directions are clear and surprised that this came with a miniature Level, came in handy when I needed to set up an anchor the mount to the wall. Normally I have quite a few levels available, but for some reason, I could not locate any of them to complete this task. So I was very happy that this came with a miniature level to complete the job. The metal another materials are very solid. Although this month looks small, it definitely can pull up 50 in tv. Originally, I purchased this too mount a 32 inch TV, but it did not have the TV yet. When I set up the mount on the wall in advance so all I need to do was hang the new tv, I used an older 50 inch flat screen TV had quite a bit of weight thats much heavier than todays 50-inch tvs. This mountain did a fantastic job supporting the 50-inch tv. Subsequently, after Christmas, Ill easily able to mounts of the 32-in TV. Overall, Im very pleased with this mount in will definitely be purchasing a second one in the near future to mount another TV at another property.

I love everything about this TV mount! It’s sturdy and was a breeze to install. Before getting this mount my TV was on my dresser, now with it mounted it has freed up my dresser top which helps in my tiny room. The only time I get to myself is when I do laundry in my room, the range of motion this mount has helps me to position my TV so I can see it from multiple angles while I move around the bed folding laundry.

Was easy to install, looks and feels very sturdy, and definitely no regrets. A couple of caveats, though. 1. The manual is kind of flimsy in its instructions. Each step is a short one-liner (in every conceivable language). A bit more verbosity would have been welcome. For example, when folded, the center line of the TV ends up being approximately 1.5 inches off from center line of mounting bracket, and that deserves a mention in the manual. 2. The manual offers only two mounting options: Into a) concrete or cinder block, and b) stud. This may be true for a heavier TV, but not all walls are built equal, and the studs may be in the wrong place (as mine were) so I used larger drywall inserts, hung my 32 17 lbs flat screen TV onto the drywall, which is backed by a 3/4 plywood board, and that is very sturdy. 3. Finally, my TV had 75 mm hole spacing for the mount so I could do without the extension ears for the plate. I also used the smallest screws of the (wonderful) collection delivered with the mount. However, the washers delivered had holes that were too big for these screws, and the heads went through the holes. So I just eliminated those and put the screws directly into the plate, then no spacers directly into the TV. The length of the screws were just right for that. All in all it took about 1/2 hour and the TV was in place.