Perlegear TV Wall Mount for 13-42 inch Flat or Curved TVs & Monitors up to 55 lbs, Full Motion TV Wall Mount with Articulating Arm, Swivel Corner TV Wall Mount, Max VESA 200x200mm, PGSF6
-
Jesenia P.
18-11-2024Bought this for my grandma. I was able to install with my mom. You definitely need two people for this but it was overall easy to install. Now i want one too lol
-
dg
> 3 dayWas easy to install, looks and feels very sturdy, and definitely no regrets. A couple of caveats, though. 1. The manual is kind of flimsy in its instructions. Each step is a short one-liner (in every conceivable language). A bit more verbosity would have been welcome. For example, when folded, the center line of the TV ends up being approximately 1.5 inches off from center line of mounting bracket, and that deserves a mention in the manual. 2. The manual offers only two mounting options: Into a) concrete or cinder block, and b) stud. This may be true for a heavier TV, but not all walls are built equal, and the studs may be in the wrong place (as mine were) so I used larger drywall inserts, hung my 32 17 lbs flat screen TV onto the drywall, which is backed by a 3/4 plywood board, and that is very sturdy. 3. Finally, my TV had 75 mm hole spacing for the mount so I could do without the extension ears for the plate. I also used the smallest screws of the (wonderful) collection delivered with the mount. However, the washers delivered had holes that were too big for these screws, and the heads went through the holes. So I just eliminated those and put the screws directly into the plate, then no spacers directly into the TV. The length of the screws were just right for that. All in all it took about 1/2 hour and the TV was in place.
-
StrykerTK
> 3 dayI have some bigger TVs that I have put up. Actually 6 of them that are 40 and bigger. They all have range of motion just like this one. The installation method was also the same as the other ones I have. The range says 13 to 42. I used my 28 TV and it worked just fine. I never use the drywall anchors because those will not hold up like using the STUD itself. Locate your stud. If its not where you want the center to be, remember that this will move one way or the other. You can have it flat against the wall, or fully extended out. You can also tilt this if you want your TV higher towards the ceiling. (Thats what I prefer) Installation is really simple and it came with all the bolts you would need. Im happy with this and this stands up to the other ones that I have.
-
Alex gray
> 3 dayI use to use a TV stand with the mount on it, but the screws kept getting stripped, so I had to buy amount for the wall and it’s a very good mount
-
Erica Henderson
> 3 dayWas easy to use & works perfectly!
-
Steve Wilson
Greater than one weekI like this mount but you want to try to size it right. I thought I would like the ability to use this for any size VESA mount but the wings included are kind of a pain to put on. Attaching the plate to the arm is pretty easy, but tightening it down was a pain. Then adjusting the tilt is easy enough but the screws there are really tight. I had to tighten them even more to keep the tilt locked in. The kit came with everything you would need, including spacers. I thought it was kind of funny that the instructions had an option for installing it on a TV with a bump out on the bottom when the mount is so adjustable. It can come out nearly 20 inches. I guess if you want to use this mount and make it flush against the wall you would need that. Its very functional but took longer than I expected to set up.
-
J T
> 3 dayThe mount is built very well and sturdy. I used this to mount a 39 LED flat panel TV and it works great. The instructions say you must mount to a stud, but I used drywall anchors due to my location and the TV not being very heavy and have no issues. The mount comes with a variety of installation screws and spacers to account for various shapes of TVs which is nice. I made the mistake of centering the mounting bracket exactly where I wanted the TV before I realized that when the mount is fully flattened against the wall the TV is offset about 1.5 to the right of the mounting holes so make sure to check that before installing. Just my mistake and nothing against the mount. Once installed, its very easy to tilt or move the TV around. Im very happy with it and have no complaints!
-
Xoe
> 3 dayJust as described and exactly what I needed. I recommend!
-
joan
Greater than one weekSuper easy install works great
-
Mallie Walter
Greater than one week32 TV for the office and was mount on the corner, the screws for drywall are garbage, you need to use toggle bolts. The rest is nice, I like it.