













Pipishell TV Wall Mount Bracket Full Motion for 50-90 Inch OLED QLED Flat Curved TV with 29 Inch Extension Articulating Arm Swivel Tilt Level, Max VESA 800x400mm Up to 132 lbs Fits 16/18/24 Inch Studs
-
Christian M. Kartanowicz
Greater than one weekWe purchased this TV Wall Mount along with our Sony OLED television in order to have piece of mind that it would safely keep our investment intact on our wall. Nearly a year later, it continues to hold the TV up both safely and securely. I chose to install the mount myself and, unless you are experienced in installing these mounts on your wall, as well as have another person to help you hold it up while you install it, you might want to consider having it professionally installed. It took me close to a couple of hours to complete the install and mount to the TV as well as zip-tie the cables against the mount. The mount allows you to pull the TV away from the wall and adjust the viewing angle to optimize your viewing experience. The mount accomplishes these tasks with hardly any effort which is a testament to its quality. I highly recommend this product to safely secure your television to your wall and, depending on your skillset for installing the mount, you might want to have it professionally installed. Again, excellent quality!
-
Marsha- Delta Junction AK
> 3 dayMounted to a log wall so super easy for this 53 year old woman. This is a super sturdy tv mount and I am 100% satisfied. Great price and great quality! Recommended.
-
Jimmy Hughes
Greater than one weekWill more than do the job . This thing is heavy duty.
-
Richard Ashby
> 3 dayPut this mount up to put an old plasma up, wanted something sturdy to handle my 77lb beast. Once all mounted up this thing moves very well and definitely gives me confidence it is not going anywhere. I did read another review where the reviewer disassembled the mount to make puting it on the wall easier. I took it an step further and used a torque wrench to find how tight the fasteners needed to keep from cracking the plastic washers used to allow the arms to swivel. Totally not necessary, just dont muscle those back together if you decide to do that. The difference was instead of balancing over 30 lbs on the wall, I just had to put the steel back plate up. However, if you dont have a full tool set for this, youll definitely struggle to mount this.
-
Misty rivera
> 3 dayIt’s a great product. Pretty heavy but other than that it comes in handy especially cause my husband is almost blind
-
A.B. Sterling Heights Mi.
> 3 daySturdy and well made. Easy to install a 75 t.v. into a 28 deep Entertainment center Holds t.v. perfectly level & easy to pivot both ways if needed.
-
NOVADAD
> 3 dayHad a service mount my 86 inch tv for me but the mount is awesome. Great range of motion and angles for viewing. Sturdy and well built to hold even a tv as big as mine. Would buy again.
-
ak
> 3 dayThis is a sturdy and well-functioning TV mount. I will say that it was a royal pain to install. Instructions are okay-ish, you need several tools not provided to install the product, and it is so heavy. The mount is almost as heavy as our 65” TV. I don’t regret this purchase but, I would rather get a root canal than install it ever again.
-
Craig D.
> 3 dayInitially, I got this for our living room to hang a 65 TV. But before the installation and After I saw the picture on this new TV, I knew this was going into our family room instead! The 65 I had there definitely needed to be replaced, so... This wall mount bracket and the TV got repurposed there instead. The installation was a little more involved than I thought it would be because the studs this mounts into were not ideally situated/positioned and mine are 16 on center, so I had to add the 2x4s to provide support. I would NOT recommend drywall anchors/channel toggles. This mount is heavy and when the mount also has up to 132 lbs of EXTRA weight, that is a lot of pressure on solidified gypsum powder and paper alone... I ended up using pocket holes to countersink the lag bolts anchoring the 2x4s to the wall so as to not interfere with the wall mount. I bought one 2x4 and cut it in half, then each 2x4 section is secured to three studs. Ill end up having to do the same in the living room with the 75 TV I got for out there...
-
Lisa A Josephson
Greater than one weekWorks as it should