Poli Glow & Mitt Applicator — Fiberglass Restorer Plus Smooth Surface Applicator.

I have a 39 year old sailboat (83 model year) that I have owned now for 26 years. I am definitely all about low maintenance. I haul out about every 3years for a bottom job and to refresh of the top sides. The Gelcoat and boot-top stripes are original. My formula is fairly simple, I start by brushing on 2 coats of Fiberglass Stain Remover (FSR ) Gel and then scrubbing off with water and a Scotch-brite pad. I then prep the surface by spraying a diluted Ammonia solution and another lite scrubbing with a Scotch-Brite pad. I rinse thoroughly with water and let dry. I use the Mitt which, as others have commented, has made the application easy and flawless. One bottle will do 5+ coats. The first 2 coats will look uneven and splotchy, but by the 4th coat you will be amazed. Additional coats just add to the shine. Some of my original prep several years ago trapped in some of the old stains near the waterline, and also trapped in some of the oxidation of the boot-top but really is not noticeable once back in the water so I am okay with it. As everyone says, any discoloration will be trapped so prep is the key. As you can see from the attachment, the results are fantastic. These results were achieved over about a 7 hour period from start to finish. It is satisfying to have others, including professional boat prep people come up from the boat yard and make positive comments on how great the finish looks.

This is a great product makes it very easy to apply PoliGlo. I just put a fresh coat on after applying several initial coats three years ago. What is great is no buffing just put wipe it on. Drys really fast. I find that I do not have to wash my MotorHome as often as I did before PoliGlo

Sure-it does a great job. Why? Because it is floor wax! We’ve known about using floor wax to get the shine on our fiberglass RV for YEARS. So someone decided to repackage floor wax into this VERY SMALL amount, add a mitt, and charge 10 times the price for it. Save yourself a lot of money-go to DIY warehouse and buy a GALLON of floor wax for $6. And to make your life easier, get a Swiffer mop that has an expandable handle and use cut up old towels to apply it. Saves you from a lot of up and down on a ladder.

Have been using for 4 years on my 32 year old sailboat. Used Poli Strip, Poli Ox and Poli Prep to clean up prior to applying Poliglow 1st time. Otherwise you are just sealing stains. Then just apply a couple of coats of Poly Glow each Spring. Great product!

Bought for my boat and ended up using on my 5th wheel trailer. Trailer was showing signs of oxidization/looked dull, has never looked better after using Poly Glow. Easy to apply, just follow the directions and the results are amazing! Im going to get more for my boat this spring.

Easy to apply and makes the fiberglass on my boat shiny.

Quick ship . Worked great on bass boat

Good Quality item, have used many times on boats

The one product removed all the oxidation and discoloration. Then I applied the recommended six coats of Poli Glow. Looks brand new!

Be sure to clean the glove really well otherwise parts will dry hard.