President Richard 10 Meter Ham Radio, 50W PEP

Very few ham radio operators use AM of FM modulation on the high frequency bands. Although, there a few FM repeaters on the 10 m band. This radio is not very useful to licensed ham radio operators. If, you buy this radio, please make the 11 m conversion and stay off the ham bands. Do your illegal and disruptive business on CB.

Works awesome after the easy modification

It did not work at all when hooked it up to the truck

Awesome radio. Easy conversion to 11 meter. Puts my Stryker to shame

Truckin cross the country ... decent ears ... needs a little mo pow wah to talk to you can hear in the weeds

Use for work

I have had lots of radios over the years and this is my favorite. Works great and I get radio checks from other towns and states. There are only 2 draw backs. 1) no ssb. 2) when putting a D104 on it. The Channel will change every now and then. Plus you have to cover the mic ground on the plug side or it will touch the center pin, witch is power and your radio will smoke like mine did. Lucky I can fix mine. I unplugged it asap. Only burned a ribbon cable. Other than that. This is a dinomite radio.

The President Richard is the best bang for the buck. Mod to 11 meters, simple. Dont care for the 6 pin mic but you can get a adapter ( 6 to 4 pin). MAKE SURE you get the RIGHT ONE! You can program just about everything with this radio & even go to advance mode & adjust power up to 80W & modulation past 100%. But do this at your own risk as you can damage the radio. As for - 1 star. These radios are said to be made in Minsk, Belarus or Naples Florida....... WRONG........Bought mine on 9/16/22 and the label on the back says ( Made in PRC-----Peoples Republic of CHINA). I checked it for Covid 19 & the fortune cookie that was in the box says USA Dummy-Thanks for the $$$

This is a great radio as long as you watch the modify to CB radio YouTube video and follow the simple directions. The mic is a little cheap but it is what it is. I would definitely recommend this item.

Did the 11 meter conversion. Red jumper wire in pic. It has to be soldered onto board. Easy task if you have the experience. If not I highly recommend against it. Look online for the steps in menu to set it up after jumper wire mod