











Recoil 20-Feet 9-Conductor Speaker Cable, 18AWG Pure OFC, Ultra-Flex and Easy Peel Jacket, 4-Channel Speaker Wire and Remote Wire
-
T. Marble
> 3 dayAll the wires you need to wire. Speakers to your Amp. Take note, this wire is HUGE. Probably close to a 1 or 1/0 gauge battery cable. It is shielded well and has a thick cover though.
-
DonS
> 3 dayThis is the all in one option for 4 channel amp setup. Ine thick wire to run but the quality is 3n to none. It simplified my whole set up. It is thick but if you can put it down the sil channels it will fit . It will bulge if its just under carpet.
-
Inyamental
Greater than one weekConnecting 4 door speakers and a remote wire to your amp made easy. Only need route 1 wire and you are done.
-
Ryan Minish
> 3 dayVery high quality! The outside jacket peels away easily as described but is also strong enough it won’t peel away on its on. This made running speaker wires from amp to radio easy and saved time. 20 foot worked well for my crew cab GMC Sierra.
-
Richard Vanlandingham
> 3 dayThis is what you need if you dont want to hack up your cars wiring harness. I ran this from the amp back up to the harness adapter that plugs into my stock wiring harness from the head unit and cut and spliced in there so my trucks stock wiring is totally intact. Sounds awesome, and super easy, never had to pull door panels!
-
Austin L.
> 3 dayGood quality and heavy duty. Worked great.
-
casey
> 3 daymost 9 wire is actually 20-22awg...finally found 9 wire that is close to true 18awg.. comparison next to stinger is night and day.. will never buy others brands again. plz dont stop making this product
-
Lee VanDerSlik
> 3 dayIt worked perfectly to wire the new stereo in my C55. The bundle was flexible and easy to work with.
-
ricky castro
> 3 dayLike how the wires are pretty basic and east to strip for connectors.
-
Bobby
Greater than one weekI havent really done car audio for several years until I recently decided to upgrade the speakers in my 2016 Focus ST. Long story short, I wanted to retain the factory radio and its associated features so I used an LOC to add an amplifier. Initially I was going to do 16(!) Runs of regular speaker wire from front to back, 8 for the high level input to the LOC and then 8 from back to front to tie into the factory speaker wiring. This product still required me to run all those wires much easier and neater. All I had to do was strip a little of the gray sheathing off each end and make some connections. This isnt an earth shattering thing, but hot damn it made the process very easy. If youre running lots of power, you might want some larger wires. But for a modest setup, this is an excellent product.