RKURCK 2 Way Power Distribution Block, 0/2/4 AWG Gauge in, 4/8/10 Gauge Out, Car Audio Stereo Amp Distribution Connecting Block for Audio Splitter (2Way)

(1399 reviews)

Price
$9.79

Quantity
(10000 available )

Total Price
Share
93 Ratings
74
6
5
3
5
Reviews
  • TBert

    > 3 day

    Good quality and easy to install. Used two of these for an audio install on a boat. Ran 4 gauge from the battery’s negative and positive and fed two amps; one with 8 gauge and one with 10 gauge. Worked great.

  • Justin F.

    Greater than one week

    Good, cheap distribution block. That is all.

  • Cody

    > 3 day

    Pretty straight forward here.

  • Jax

    Greater than one week

    This is an aluminum block that has been plated. Silver color when I filed a corner. Non-magnetic. Not copper. Not brass. Buyer beware. Wouldnt have bought if Id know it.

  • Dilon

    > 3 day

    Liked how it’s easy to install and does the same as combining multiple wires. Makes life easier. Dislike the plastic mounting brackets they hold but they move around a little

  • M

    > 3 day

    Used two of these, one for power and one for ground 12V distribution in a Transit van camper conversion for solar, inverter, alternator, and light, pump and fridge loads. Did have to be careful with the aluminum solar power cables as it tended to break off the wires when screwing them in but got it figured out by removing only the face of the insulation then works perfectly.

  • Coby metz

    > 3 day

    They work good the cover is nice also but it should come with both of the tools you need

  • Lillian Block

    > 3 day

    Good quality block! Feels solid and heavy enough doesnt feel cheap. Its working great so far!

  • Travis

    > 3 day

    these are great!

  • Nava R.

    > 3 day

    Plastic burned up



Specifications:
The 2-way power distribution block allows you to connect as many as three amplifiers to a single power source. The main input lets you connect 4 or 1/0 Gauge wire from your battery to the block, and you can run up to three 4-Gauge or 8-Gauge wires to your amplifiers.

Features:
Type: 1 Way In 2 Ways Out power Distribution block
Distribution Block Weight:90g
Size:45 x 40 x 28mm/1.77" x 1.57" x 1.1""" (L*W*H)
Screw-down Wire Clamps
Input: 0GA/2GA/4GA Gauge Wire
Outputs: 4GA/8GA/10GA Gauge Wire
Impact Resistant Snap-on Plastic Cover
Platinum-Plated for Corrosion Resistance
Offers complete protection for your car audio system

Note:
For your vehicle’s protection, it is better to put an inline fuse holder between the distribution block and your vehicle’s battery.It can also be used to combine the ground wires of multiple amplifiers to a single grounding point.

Package included:
1 x 2 Way Car Power Distributor Block Holder

Related products

Shop
( 2621 reviews )
Top Selling Products