Schluter Kerdi-Shower Kit 38 x 60, ABS Flange (1)

Have pitched these multiple times. Water tight install. Fast light weight install.

Easy install, great kit!

Product makes life that much easier

Many other reviewers have commented on this... I didn’t notice until after I purchased it, but this is a KIT for a 38” x 60” shower pan, but it comes with two 38” long curbs. I genuinely can’t understand what Schluter would create a kit that doesn’t include enough curb for the shower they sized the pan for. I had to spend another $90 to get a 60” long piece of curb separately. In addition, I strongly recommend you buy their proprietary mortar blend. Generic I modified thin set was not “sticky” enough to easily embed the provided seam tape to create waterproof joints. It took a lot of finesse to get the tape to lay flat using I modified thin set. On the positive side, I think the drain setup is easier to work with and of higher quality than other kits I’ve worked with and the kit being based on prebuilt pieces made it easier to assemble and adjust to fit... if you aren’t working in new construction and don’t have perfectly flush, level, square, and straight walls and floors, this is the best kit to use. Our house is 180 years old and to make the pan fit the opening, I trimmed the pan such that it ended up 36.25” on one side and 36” on the other and it worked flawlessly.

Perfectly sloped floor and completely sealed to avoid leaks.

The supply stores rave about this product but its quite a bit more difficult to install than the manufacturer makes it out to be, I also installed a corner bench, thought i would never finish installing all the corner flashings and its really expensive for what it actually is, some special fabric and foam board base, they need to lower there prices on this stuff.. and dont forget that you have to use an unmodified thin set to install it with!! try getting that at a box store( good luck), they dont even know what that is. Im a general contractor and seriously doubt Ill use this product again!! BTW, you can get the required modified thin set at a tile store but it will cost you ( $ 35+ for one 50lb bag.

The price of this item was the best around. Tracking was accurate and item was packaged well. Thanks

Excellent kit and surprisingly easy to install for a DIY’r. Our shower had been leaking and came to found out there had been no waterproofing installed and a very old mortar shower pan that wasn’t correctly installed to the drain. I was dreading installing the shower pan until I discovered this kit made the shower pan an easy install. Water tested it and was incredibly impressed with no leaks.

Better price, same quality

The hardest part of a shower pan is creating the slope. This system allows you to easily install.