SMARTSTANDARD 6ft Heavy Duty Sliding Barn Door Hardware Kit, Black, (Whole Set Includes 1x Pull Handle Set & 1x Floor Guide) Fit 36 Wide Door Panel (Big Industrial Wheel Hangers)
-
Ashlee Seidel
> 24 hourLooks good, fairly easy to install. As expected instructions were lacking. Operates smoothly.
-
Steve Oldham
> 24 hourGreat quality for the price
-
Trystan Stroman
> 24 hourWorks as it should
-
Thisleridgesoap
> 24 hourUsed for a barn door built by our contractor.
-
KEY
> 24 hourBad investment did not send all parts needed.
-
Jose A.
> 24 hourGreat product, great customer service, fast delivery. Recommended 100%. Will buy again
-
Terence Ferry V
> 24 hourWell made,good quality. Made for an inch and three quarters thick door.
-
Jeff Brooks
> 24 hourThis is a really high quality product.
-
Michelle VanDeel
> 24 hourAbsolutely love my barn door!! Turned out amazing. Looks great. Good price. Quality materials.
-
Leotie whitehead
> 24 hourLoved everything about this kit, the only complaint I have is that it is a two piece rail. Once we hung out the joint started to sag and where the two rails “locked” together began to split. We ended up buying our own piece of flat iron up. Works much better now and is WAY more sturdy!
Q: How to ensure the stability and safety of the door?
2 * Door Stoppers: Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close.
1 * Floor Guide: A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard.
2 * Anti-jumpers- those little round discs- go on top of the door and won"t allow door to be lifted off rail unless they"re turned.
Q: When do you need a headboard?
a. If the studs don"t line up with the pre-drilled holes in the rail.
b. If there is a doorway trim.
And "door depth"" plus "trim depth"" is greater than 2""
Q: How much space do I need above the doorway?
A: You will need a minimum of 8" from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly.
Q: How thick of a door will this kit work with?
A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8" to 1 3/4", but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below:
2""- door depth - trim depth
If your answer is 0 or greater, then you"re fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 5FT Big Wheel | 6FT Big Wheel | 6.6FT Big Wheel | 8FT Big Wheel | 10FT Big Wheel | 12FT Big Wheel | |
| Brand | SMARTSTANDARD | SMARTSTANDARD | SMARTSTANDARD | SMARTSTANDARD | SMARTSTANDARD | SMARTSTANDARD |
| Track Length: | 5 foot | 6 foot | 6.6 foot | 8 foot | 10 foot | 12 foot |
| Compatibility: | Single Door | Single Door | Single Door | Single Door | Single Door | Single Door |
|
|
|
|
|
|---|---|---|---|---|
| 8FT Double Big Wheel | 10FT Double Big Wheel | 12FT Double Big Wheel | 16FT Double Big Wheel | |
| Track Length(ft): | 8 Foot | 10 Foot | 12 Foot | 16 Foot |
| Compatibility: | Double Door | Double Door | Double Door | Double Door |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 5FT Big Wheel Kit | 6FT Big Wheel Kit | 6.6FT Big Wheel Kit | 8FT Big Wheel Kit | 10FT Double Big Wheel Kit | 12FT Double Big Wheel Kit | |
| Track Length(ft): | 5 foot | 6 foot | 6.6 foot | 8 foot | 10 foot | 12 foot |
| Compatibility: | Single Door | Single Door | Single Door | Single Door | Double Door | Double Door |