Spigen Tempered Glass Screen Protector [GlasTR EZ FIT] designed for Samsung Galaxy Watch 3 (45 mm) - 2 Pack

perfect fit and look. i was concerned because some said they had a gap on theirs. it has a tapered edge that gives it that illusion, but under a magnifying glass, i dont see how it could have been a better fit. the glue seems to be holding even after getting wet. smudges are about the same as the original screen. i dont even realize its on there. no sensitivity issues at all. take your time putting it on and the application is well thought out. very happy with this.

I love the thickness of the glass and the touch response. However I used the guide to install it but it aligned it all the way to the left, not centered leaving a space of screen exposed between the glass and the bezel. Considering removing this one and putting on the 2nd one to see if it will change anything.

Great protector for samsung galaxy 3. Its nice. Pmus good brand also. All my protector and cover is from spigen.

I was blown away by just how simple this product was to install. It came with all the supplies needed but it was such a flawless experience, I didnt have to even use half. The template guide placed the protector in exactly the right position and it is quite a thick protector. I feel this will protect my screen from any mishaps without any hassles and it doesnt affect the use / functionality of the watch in any way.

the tray doesnt line it up right...very clearly off center. without the tray its literally impossible to line it up right without getting fingerprints all over the edges, which then cause a rainbow effect. I love spigen and have used their cases on all of my phones for the last five years or more, but this thing is absolute trash. a complete waste of $13. edit: after fighting with it for about an hour, i am going to revise this and bump it up to two stars. i was FINALLY able to get it lined up by using a combination of the included dust stickers and scotch tape to try to keep it centered. the issue when trying to put it on without the tray is that its very picky as to where it will actually adhere...it kinda floats around the screen until you push it down, but as soon as you push down on it if the tray isnt there to hold it in place itll move and then be off-center yet again. the way i finally came up with to resolve this was to get it lined up in the center (by putting it there gently and then moving the watch around until its floating in the center), and then try to use the large dust sticker and some tape to try to make sure you keep it in the middle and press down at the same time. even doing this it took me 3 or 4 tries to get it to the point where it was centered...not to mention that by then, youve taken it off and put it back on so many times that youre almost guaranteed to end up with dust under it. also, even when its centered, there is still a rainbow-ish effect around the outside of the screen, because the protector is cut slightly too small and doesnt cover the entire screen (0.5mm all the way around, from what ive read). i will say that in addition to the specs of dust that are under it (but im too annoyed to try taking it off again at this point), there were some fingerprints along the edges that i left on mine because of fighting with it for so long...they seem to have resolved themselves after letting it sit overnight. so, ill give it a bit of a bonus point for that, i guess. all in all, i do have it on my watch now but theres still dust under it and im not sure taking it off and trying again with the second one would do any good, considering how far off the alignment was on the first one. im just going to end up having the same issue all over again, and my stress levels cant deal with that. ill leave this one on until i get sick of looking at the specks of dust under it, then ill probably try again with the second one and throw the entire thing in the trash once that one fails as well. to recap, i did bump it up to two stars because if you can actually get this thing on and lined up right with no dust under it, it does the job and is very clear and the screen does look as if theres nothing there (except for the rainbow effect around the edges because its 0.5mm too small all the way around). i just cant justify going any higher than that based on what a complete fiasco it was to install, as well as the rainbow effect around the edges. edit 2: bumping to three stars because of spigens awesome customer support. i sent them pictures of the protector on my watch and how i had dust under it due to the horrific install process (and misalignment when using the tray), and theyre sending me a second set. what i may try to do is take the protector out of the tray entirely and just use a piece of scotch tape on the front side, and try to line it up that way rather than wasting another protector via the tray. ill continue to update this review once the new set comes and i decide to peel this one off and try replacing it...

While the actual product is probably as close to perfect as you can get, the installation instructions are a hot mess. Go to the website for a video on installation and you get to watch them do an install on an apple watch. And the video does not outline all of the actual steps for the materials you receive in the package. Again - the video is for an apple watch and could be several years old. Decipher the instructions that come in the box and again they dont include all the steps involved. Read the instructions on the Amazon website (probably provided by Spigen) and again you are shortchanged. I counted at least 9 steps to properly install the screen protector. 1: Clean your watch screen with the included alcohol wipe. 2: Wipe the watch face with the included microfiber cloth. 3: Use the included sticky to carefully remove any lingering dust. Avoid laying down new fingerprints/smudges. 4: Remove the first film protector from the INSIDE of the mounting frame. 5: Press the mounting frame down gently onto the watch face. 6: Press the center of the mounting frame gently but firmly to ensure adhesion of the protector to the watch face. 7: Remove sticker from OUTSIDE of mounting frame to release protector from mounting frame. 8: Remove the mounting frame from your watch and use the included squeegee on protector face to remove any residual bubbles. 9: Remove the last protective film from the watch protector and then use the microfiber cloth one last time to clean the watch face and enjoy your newly protected watch. And before you throw that alcohol wipe away, use it to remove the grunge you probably have on your smart phone and/or tablet.

Absolutely the best watch screen protector Ive used - installation and function. In spite of difficulties reported (and the instructions are crystal clear and printed on the mounting frame - Remove, Press Here), its about as foolproof as you can get. The process is: Clean the watch face with the pads provided. Remove the backing from the protector as instructed - the protector comes as an all-in-one unit with the protector inside the mounting frame. Place the frame over your watch - it fits perfectly if you place it longitudinally as instructed (and you have purchased the correct size for your watch - there are TWO sizes, 41mm and 45mm). Press where it indicates Press. Remove the sticker (where it says Remove). Lift off the frame. Peel off the protective film on your watch face. Youre done. The protector is perfectly centered, bubble-free (they do provide a squeegee, which I didnt need), and installed. The edges are polished, the protector is very thin, it has perfect adhesion and you will never know its on your watch. In spite of the slightly higher price compared to other 4-pack, 6-pack tempered glass protectors, youll only need to install this once. Highly recommended.

Easy to use, comes with everything to prep the surface

With the alignment tool makes installation a breeze and the glass its self is very strong. I had a heavy caster fall and hit my watch and nothing broke or scratch except for the rotary bezel lost a little paint. I am very happy with the screen protector and it fits excellent.

Easy to install and looks great.