Tear Away Machine Embroidery Stabilizer Backing 8x8 - 100 Precut Sheets - Medium Weight 1.8 oz- Fits 4x4 and 6x6 Hoops
-
Drew Friesen MD
> 3 dayawesome product good size
-
sunnyhat
> 3 dayThe weight is perfect for use for many of my machine embroidery projects. Quality is quite good
-
Angel Roob
> 3 daySecond purchase of this product. Will buy more.
-
Zephra Kneese
> 3 dayVery thin and not awesome. HOWEVER the company contacted me immediately and offered to send a replacement asap. They truly went above and beyond!
-
Mayors Wife
10-06-2025This stuff is so thin I feel I need to use 2 sheets. Very disappointed.
-
Laura Werkema
> 3 dayI am using for embroidery, but it is a lighter one
-
Megan
> 3 dayI have a lot of waste with these, but honestly it’s worth it to me for the convenience… very sturdy and easy to use!
-
Barbie D
> 3 dayHonestly, I havent used tearaway stabilizer since I first started embroidering 7 years ago. What I used back then always had horrible edges when it was torn away, so I use either water soluble or no show mesh. I really needed some tearaway to float under more dense designs to prevent puckering. I just didnt want to buy any -- until I had to!! I searched and read reviews, and decided to just try this. Let me tell you it has changed my mind about tearaway stabilizer! It is amazing! The edges are completely clean when you tear it away. I recently did a design with 88,000 stitches and it held the design PERFECTLY. Absolutely no puckering at all! I laundered the pillow covering after embroidering it, and it washed and dried perfectly! No shrinkage and no distortion. This product definitely has made me a believer in the value of floating a tearaway stabilizer, AND I wont hesitate to hoop it when necessary for those projects too! You will be thrilled with this product -- especially if you are like me, and usually stay as far away from tearaway as possible because of what the edges look like when you tear it! I wont ever be without this specific product in my sewing room!!
-
Sewfisher
> 3 dayI thought I would try it, because it got so many good reviews. I was slightly disappointed. I do a lot of heavy stitch count embroidery, not good for that at all. I should have ordered 12 width instead of 10 width, It doesnt fit on any hoop except very small
-
Joshua Torres
Greater than one weekWorks great
How to Choose the Right Type of Embroidery Stabilizer for Your Fabric?
A stabilizer used to support the fabric during stitching to avoid the puckering and stretching is an essential for machine embroidery. Generally, stabilizers are classified as cut away, tear away, wash away. Here we will direct you to choose the proper stabilizer for your fabric and design among New brothread machine embroidery stabilizers.
Tear Away Embroidery (Medium Weight 1.8oz)
Tear away stabilizers are used when you wish to remove most of the excess stabilizer from the back of the project after embroidery.
It was recommended to be used on woven fabrics that have no stretch like quilted fabrics, 100 percent cotton, poly cotton fabrics, linen, vinyl, leather...
Cut Away Embroidery (Medium Weight 2.5oz)
Cut away stabilizer must be removed by cutting it away and the rest behind the stitch will remain on the fabric for the life of the design.
Cut away stabilizer is considered the most stable stabilizer.
It is typically recommended for unstable and stretchy fabric such as knits and high-stitch count design.
Wash Away Embroidery Stabilizer (Light Weight 1.5oz)
If your project requires no traces of the stabilizer to be left after embroidery, you must use a wash away stabilizer.
The strength of support offered by a wash away stabilizer is significantly less than cut away or tear away stabilizers.
Wash away embroidery stabilizer is recommended for lightweight fabric and Free Standing Lace.
No Show Mesh Embroidery Stabilizer (Light Weight 1.8oz)
No Show Mesh is also a kind of cutaway embroidery stabilizer which will remain forever fixed to your fabric but it is sheer and semi-transparent which is not for very heavy design.
No show mesh stabilizer is recommended for light colored fabrics.
It is extremely soft for baby garment and some fabric when soft is a very important consideration.
Water Soluble Topping Film (Light Weight 25Mircon))
Water Soluble Toppings are used only on the top of the fabric to control the nap of the fabric. It is best used on napped fabrics such as towels, knits, velvets, or velveteens to prevent the stitch sinking into fabric. They are too lightweight to be used as the backing stabilizer.
Fusible Iron On Embroidery Stabilizer (Light&Medium Weight)
Fusible Iron On stabilizer has a side with shiny coating which can be ironed to the wrong side to the fabric, so it can be fix to the fabric without a hoop.
Using Fusible Iron On stabilizer will prevent stretching of the fabric during the hooping process.
Black Machine Embroidery Stabilizer Backing
Black embroidery stabilizer is very useful on similarly colored garments or fabrics.
New brothread supply 3 kinds of black embroidery stabilizer: black cut away, black tear away, black no show mesh.
Sticky Self-Adhesive Tear Away Embroidery Stabilizer Backing
Sticky Tear Away Embroidery Stabilizer is a self-adhesive tear away embroidery stabilizer which is very ideal to use on fabrics that can’t be hooped or too small to fit in a hoop. Our sticky tear away embroidery stabilizer can be torn away easily yet provides adequate stability, leaving no tears and residue.
New brothread Machine Embroidery Stabilizer Series
|
|
|
|
|
|---|---|---|---|
Cut Away Embroidery Stabilizers
|
Tear Away Embroidery Stabilizers
|
Wash Away Embroidery Stabilizers
|
No Show Mesh Embroidery Stabilizers
|
|
|
|
|
|
|
|---|---|---|---|---|---|
| Cut Away Embroidery Stabilizer | Tear Away Embroidery Stabilizer | Wash Away Embroidery Stabilizer | No Show Mesh Embroidery Stabilizer | Fusible Iron On Embroidery Stabilizer | |
| Cut Away Embroidery Stabilizer | Tear Away Embroidery Stabilizer | Wash Away Embroidery Stabilizer | No Show Mesh Embroidery Stabilizer | Fusible Iron On Embroidery Stabilizer |