TheCoolCube Touch Screen Digitizer Replacement for Samsung Galaxy Tab 2 GT-P5113TS GT-P5113 P5113 P5113TS 10.1 Black

No response once installed.dud crack it pushing it in on the corner. Be very careful.its super fragile. Dont know if Ill order another,only tab 2 supplier on Amazon.

Nice

Came with great adhesive

Works Great! No adhesive to hold it firmly to the iPad though, but it works perfectly.

Good part. Noproblems.

Works absolutely perfect. Has the logo which wasnt necessary but was nice. Came with double sided tape that was easy to remove. Im happy.

Junk, would not plug into mother board of tablet, buy original rather than wasting your time and money with generic

This is excelent

This is a good replacement digitizer screen product, it fits perfectly, but you need to know a few things. I will add some of my experience here, for your benefit. Removing the digitizer glass was a pain, but you can watch those youtube videos, they can help you a lot in understanding what needs to be done to remove the digitizer glass. That process is not easy at all, it takes some effort. I have used the heat gun and a few razor blades that I carefully worked in, a few millimeters at time, leaving some razor blades in position while I worked other areas. This razor blades + heat gun trick was repeated until the digitizer glass was removed. Cleanup was not too bad, I have used some denatured alcohol to clean the residues of glue/screen tape that held original digitizer screen in place. This is my second digitizer screen glass that I am replacing on same Samsung 10 tablet. First glass was accidentally dropped and cracked before I was able to apply it to my Samsung tablet. So, technically it is my first successful replacement of digitizer glass :-) I was very unhappy about dropping and damaging the digitizer glass right before I was ready to apply it and I was very unhappy that I was unable to finish my project but I did not give up, I packed up the tablet parts in plastic bags and then ordered a replacement digitizer screen so that I can try again. And, so I have tried this process again, and it was a success. But, it was not easy. Here is what I learned and what it could help you specifically with replacement of the digitizer screen glass; -- be careful when you peel off the protective clear plastic! Make sure that black self-sticky tape stays on the digitizer frame, that it is not pulled away with the plastic sheet. I made that mistake, I have never done this before and the tape was peeling off the frame, instead of staying on digitizer framew! I had to carefully reposition black self sticky tape on digitizer screen frame and peel of the transparent plastic sheet while making sure that tape stays on screen frame. I think that protective plastic and double sided tape have better adhesion than double sided tape and digitizer frame, hence this problem. -- make sure that your digitizer screen is not touched from inside so it does not leave the smudges or fingerprints. I made that mistake too. Cleaning was a pain in the ... you know where. Try avoiding this mistake. Best advice is to avoid touching the digitizer pad glass from the inside once the protective plastic is removed! -- you can use denatured alcohol to clean the tablet screen part (that is the LCD screen behind digitizer screen glass) but make sure you do not touch any other area around the screen -- it could remove the black masking around the screen. I have done that mistake too. Use this advice together with instructional videos from YouTube on how to replace the digitizer and you should have satisfying results. Please keep in mind that digitizer screen replacement is not an easy process, it requires some patience and some trial and error. Unfortunately, trial and error means that you can mess up things, but hey -- that is the life! This is a good replacement digitizer screen so if you feel like doing this project yourself -- go ahead and order one.

great replacement screen.