Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)

Easy to install and help with thermals

I tried this modification because I didnt like how much torque was being applied to my CPU when using the stock fastener. I am not sure if it was actually bending the chip but it was under too much pressure in my opinion. Temps improved slightly. Easy to remove original and install and looks cleaner than original silver clamp. Comes with tool to remove and reinstall screws.

When I bought my i7-13700K, the CPU would randomly spike to 100 °C while idle and stay at that temperature for 4 to 5 minutes. I upgraded my CPU cooler to a corsair 420 mm CPU watercooler, but the same issue occurred, although it didnt stay as long at 100 °C. The problem disappeared when I switched to the Thermalright contact frame. I also noticed an improvement in the average temperature of the CPU at idle and under load. It is clear that this contact frame helps the CPU behave in a better way, especially for a CPU that is known to overheat.

I was skeptical, but after struggling with my OC 13700K temps despite custom loop I decided to give this a try. No change in ambient, test, or overclock with a 12 degree delta. 12 degrees for a ten minute installation is massive. Cinebench caps at 88 now when I was hitting 100 and throttling previously. 5.7ghz all core and happy.

Once I saw a video on this item, I decided to purchase one. It is as good, if not better than the name-brand one. Dont waste your money getting a name-brand one. This one does a great job keeping the CPU flat and has proper contact wth your cooling device.

Installed this on my Asus Maximus Z790 Hero with no problems. Used factory screws from motherboard and no issues. Make sure to tighten in criss cross pattern to make sure it tightens evenly and doesn’t bend. Highly recommend as this also lowered my CPU temps on my 13900k

Multiple cores of my i9-12900KS CPU always peaked at 100 degC during Cinebench R23 multi-core tests conducted at 21 degC ambient. I tried several thermal paste application methods/patterns, ...but following AIO pump assembly removal, the paste residue pattern was always evenly distributed with no evidence of CPU IHS cover bending/warping from the motherboards standard LGA1700 CPU mounting solution.

Before installing this contact frame on my i7 13700k, I was getting temps around mid 70’s while playing Escape From Tarkov and Insurgency Sandstorm. I have my cpu undervolted by .1 and overclocked by 100mhz (very mild imo). I’m about 5 hours into gaming after installing, and my MAX cpu package temp so far has been 68C, but average is 60C!!! That is a huge improvement from before. Very glad I spend the 12 bucks!

Corrected a warp that caused uneven cooling. Works great to properly secure the processor and allow for proper mounting of a cooling solution. Made from aluminum not plastic. Remains straight under pressure.

This thing is so simple to install . Not expensive, but works like a charm.