Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)

Combined this plate with a very slight undervolt on my 13700k and now its maxes out around 85C as opposed to thermal throttling before. 100% these plates are essential for keeping new Intel cpu temps under control.

Tengo una motherboard Z690-F de Asus y desde que coloqué el procesador intel i9 13900k hace 3 meses noté que quedó con demasiada presión con su soporte de CPU Stock. Decidí adquirir este LGA1700-BCF para quitarle esa presión al procesador, el cambiarlo fue realmente fácil ya que te incluye la llave para los tornillos que lo fijan a la motherboard. Las Temperaturas que obtenía en mi procesador eran realmente buenas, sin carga Variaban de 32 a 36 grados y con Cargas extremas pegaba a los 80 grados y más. Después de Cambiarlo noté que sin cargas está entre los 28 y 29 grados y con cargas obtuve en promedio 6 grados menos de Temperatura, el rating de mi cooler en Bios me dió un valor de 177 puntos lo cual es excelente para controlar las temperaturas. Este accesorio lo adquirí para evitar esas flexiones del procesador y cuidar su tiempo de vida lo más posible y no tanto por controlar las temperaturas, lo cual fue como un plus el obtener esos 3 o 6 grados menos en la temperatura. Cabe mencionar que tengo activo el overclocking de ASUS con frecuencias del procesador de hasta 6200MHZ. Si deseas cuidar tu inversión de 12va o 13va generación cambiando el adaptador stock, super recomendado este producto para reemplazar ese Frame LGA1700.

I tried this modification because I didnt like how much torque was being applied to my CPU when using the stock fastener. I am not sure if it was actually bending the chip but it was under too much pressure in my opinion. Temps improved slightly. Easy to remove original and install and looks cleaner than original silver clamp. Comes with tool to remove and reinstall screws.

I didn’t notice a change to my thermals, but it makes my install look cleaner

Overall, Good frame, unfortunately I took off my old thermal grizzly (TG) paste and I went from an idle of 35⁰ to 42⁰ on a 13700k. So I reseated the cooler, same story. Finally I went to my microcenter and in a last ditch effort got more TG. After applying it, my cpu dropped to a cool 30⁰ this frame cost a fraction of TGs and gave me a 5⁰ drop and under load got my cpu to stop thermal throttling (on a liquid cooled system mind you)

Hello all. This is really a great product and works very well. Ive overclocked my 13600k to 5.5GHZ all cores and I never go over 50c while gaming I would really recommend it for you

decided to rebuild my computer using a i7-12700k and from what i read and what all my builder friends told me, having this retainer is a must for the long term, as it helps mitigate temperature spikes and evens out the CPU to Cooler contact, allowing for an even heat distribution. Now, I’m not super computer savvy and I’ve only built 3 computers in my lifetime, but if I can install this easily, than anyone can.

Luckily I stumbled upon a video from Gamers Nexus highlighting these. Bought one because why not. Easy to install and it feels like my cooler is more secure than ever. I am running a z790 board with an Intel 13700k. My temps havent even needed to kick the fans on full blast yet.

As per gamers nexus and jays two cents, this provided a better pressure distribution on my cpu. Low profile and more reliable than the stock bracket

Work as advertised, easy to install.