TORACK 3Pcs Metal Pegboard Panels for Wall Garage Utility Tools Pegboard Storage System for Workbench, Shop, Shed Modular Peg Board Organizer Board Kit(Pack of 3, Grey)

(1968 Reviews)

Price
$59.99

Quantity
(10000 available )

Total Price
Share
59 Ratings
52
4
2
1
0
Reviews
  • David J Lavrenchik

    > 24 hour

    This kit comes with three metal pegboard panels and mounting hardware. Each pegboard has a black painted finish that is scratch resistant and durable. The pegboards are available in black or white. The heavy duty metal will hold up to years of use, abuse and heavy loading. The pegboard hole pattern will fit any 1/4 and 1/8 hangers (not included). I mounted these on the wall next to my basement workbench and had no problem loading them up with tools. In fact, Ill likely get more pegboards to help organize the rest of my tools. Would recommend this to anyone.

  • Bonjon

    > 24 hour

    These are far superior to the wood pressboard type. I love that no spacers were needed. They just screw directly to your wall and at spaced perfectly due to the offset. They have a very clean look. Moisture won’t deteriorate or make them swell like traditional pegboard. The sizes are perfect for mounting horizontally or vertically so they are really adaptable to your space. Perfect for garages, laundry or hobby areas.

  • Jason Gargo

    > 24 hour

    In the interest of full disclosure, as a trusted and unbiased Amazon reviewer, I was able to request this product free of charge. Nicely made racks, heavy weight and durable. Clean finish. There is a rolled edge on the top and bottom. There are no welds in any of the corners that I can see; however, this doesnt matter as these are plenty strong. These do not accept 1/4 inch hooks. I have some hooks that measure 3/16 of an inch and although these will insert into the holes, they will not make the bend in order to be used. These racks work fine with 1/8 inch hooks only. When mounted, the distance from the wall is approximately 11/16 of an inch - more than adequate spacing to insert your hooks. A nice product just wish they accepted 3/16 - 1/4 inch hooks.

  • GeeBee (OH)

    > 24 hour

    The powder coating is even and thick enough to be durable. The hole spacing is spot-on. I will be installing these into a wooden frame and they will become the focal point of my home wood shop. I had never thought about using metal peg-board before but I am so glad I found these. Granted, they arent as inexpensive as traditional pegboard but that stuff is getting pricey too. If you want to show off a tool collection of simply want a better than average pegboard to put your chisels, you found it.

  • Kelly Egbert

    > 24 hour

    I look forward to being able to hang these in the garage and better organize my tools in a visible space. While maybe not the size of a full pegboard sheet, Id still trust these over the fiberboard to hold heavier tools. Just make sure you hit studs and youll be golden. The finish is nice, I tried to scratch it with a key and couldnt make more than a barely visible mark on it. Now I just have to order the pegs!

  • Charles Spivey

    > 24 hour

    We were looking for storage ideas for my wifes craft room, and came across these panels. She was wanting to redo her storage, and did not want to use a wood pegboard, so these fit the bill. They came in a box well protected, and there were no scratches, scrapes, or dings on any of the panels. They were easy to install, and they fit the peg bins, hooks, and shelves that my wife had purchased previously without an issue. The panels are strong, so there has been no issue of the panels bending or breaking, but my wife over filled one shelf that had plastic hooks, and the shelf broke, but did not harm the metal pegboard at all. These are great for the craft room, but after seeing them, I am thinking about ordering some for my garage, I just need to get rid of some stuff first to make room on a wall.

  • Neil Henken

    > 24 hour

    These are good sturdy metal pegboards and have a good quality feel to them, they are ideal for hanging heavy tools on, I love the black finish which I think looks really stylish, these boards are a big step up from the particle board style that you get from the home stores, they need a solid wall to attach to as they are much heavier than the particle board style. Overall I really like these peg boards they look great and make the work area look and feel professional.

  • Florida Wave

    > 24 hour

    These worked great for what I needed. Hung them up in my garage. Much sturdier than the particle board ones I had.

  • jewells68

    > 24 hour

    I have to say I love that they came with the screws AND the anchors, but the holes in the pegboard were too small to insert a pencil into for marking the wall for the drill points. I had to use the pointy end of a long skinny awl to mark the wall. Also I had to employ a bit of trial and error because the diagrams/packaging did not indicate the sizes of drill bits needed for installation. It also mentions you need a hammer but never mentions the hammer being used in any of the text directions. I took measurements (and notes) as I installed the first board to make installing the other two pegboards easier. Ill share those measurements here. For inserting the anchors into the wall I used a 5/16 drill bit. The top far left hole is 11 away from the far right top hole. The top left hole is 22 7/8 from the bottom left hole (and of course the same distance goes for the holes on the far right side. If one or more holes are over a stud, you wont need the anchor. For that hole you would use the 3/16 drill bit. As you can see in my photo, I did not install them immediately next to each other but instead chose to install each of the three in between the tracks for my track mounted shelving system in my sewing room. Now I can use my existing shelf brackets and shelves until I get more pegboard accessories. Definitely recommend them. I can use magnetic hooks, pegboard hooks, etc. I have been wanting pegboard but much preferred the idea of having it be metal.

  • Joe P.

    > 24 hour

    These are some nice sturdy metal peg boards. They mount to the wall or your bench easily. The paint looks to be a powder coat finish and protects the metal well. They are strong enough to support some heavy tools without bending the metal. If you already have a supply of hooks, the holes are only big enough to accept up to 3/16 diameter hooks, so if you have bigger hooks these wont work without drill the holes out larger. I dont know that they are worth paying such a higher price than MDF pegboard for everyone. Ive never had a problem with MDF pegboards getting damaged like they show here, but its nice to have something that is really sturdy what you can hang some more serious weight on.

pegboardpegboard

TORACK pegboard organizer panels

pegboard kitpegboard kit

If you have plenty of items are just sitting loose on the workbench or been tired of digging around in a tool box, TORACK pegboard system is the perfect solution.

Features of the pegboard panels

garage pegboard tool organizergarage pegboard tool organizer

garage pegboard organizationgarage pegboard organization

garage pegboardgarage pegboard

Metal Pegboard

Wall mount pegboards are made of high quality steel with powder coated finish, sturdy, scratch resistant and easy to clean. Will last forever and never warp.

Welded Corner

Garage wall pegboard has the welded corner, edges are folded cleanly, safe and solid. The thickness of the edge is 1/2 inch.

Thicker Material

Peg board wall organizer is well-built. Good gauge, nicely punched. The metal panels are strong enough to hold all the weight of your tools.

peg board metalpeg board metal

Related products

Shop
( 2278 Reviews )
Top Selling Products