













TSSART 2Pack Heat Resistant Tape - Blue Heat Press Tape 0.4 inch Wide 108FT Long for Vinyl Sublimation Heat Transfer Application, Oxidation and High Temperature Resistance Easy Peeling Residue Free
-
JujubeMBA
> 24 hourIts nice that you get four rolls of tape. It works well, with good adhesion. I use it for heat pressing fabric. It does the job and is good value for the price.
-
Queen Bam
> 24 hourThis tape does exactly what its supposed to. It holds my images down during the heat press process. You get 4 rolls which is plenty. I recommend this tape to anyone designing t-shirts or whatever.
-
Hawk eye
> 24 hourThis tape is a nice little luxury for me. I own and operate a few 3D printers as a hobby, and this tape is a surprisingly helpful item for my recent experiments. Im experimenting with various printer settings, which is resulting in a lot of failed and flawed 3D prints. No worry for me, as its using up old filament, and its giving me sacrificial samples for airbrushing, but I digress. This tape helps me salvage some 3D prints in unique ways. Ill describe my latest use of this tape as an example: I 3D printed a squirrel statue fully intending to airbrush it. However, the print suffered nasty layer separation during removal. So, I hot glued the layers back together, and used this tape to bind the print, holding the layers together while the hot glue set and dried. Even with deliberately brushing the hot glue gun tip across this tape, it held and didnt let go. To really test this tape, I fired up my hot air gun to whisk off stringing hairs off of the print. The hot air gun doesnt have a temperature gauge, so I dont know exactly how hot I was running it, but again, the tape didnt budge. Id guesstimate the temperature of the hot air was at least 200 degrees Celsius. Mind you, using a hot air gun to clear print stringing is a fast affair, and you always keep the hot air gun moving so as not to let the 3D print turn molten and deform, so I definitely didnt torture test this tape. Be as it may, I dont think any other household tape would have held up like this tape did, and decorative 3D prints like the squirrel statue cant just be thrown into a standard clamp. If this tape were wider, Id try using it on the build plate of one of my printers. But at a width of 0.4 (just over 3/8), itll take a very long time to lay this out on the build plate, and I dont deem that worth the time. However, given the results thus far, I would definitely trust using this tape as a cover for a FDM/FFF 3D printers build plate. Im not sure if or how well prints would stick to it, but I do know as far as temperatures go, this could perform as well as kapton tape.
-
Leidy Fuentes
> 24 hourIs everything I wanted and more. Definitely buying again.
-
Jennifer Douglas
> 24 hourI consistently use this heat tape for my sublimation projects and I have had zero issues with it. It removes smoothly and protects the project absolutely flawlessly to help mitigate ghosting. I will continue to purchase this pack as part of my supplies for my projects. I hope this review is helpful!
-
Lilliana’s Heart
> 24 hourIt works as intended. Comes with 4 good size rolls. Great value for the money.
-
labbie1
> 24 hourThis TSSART 4Pack Heat Resistant Tape - Blue Heat Press Tape 0.4 inch Wide 108FT Long is really great. This heat tape had an interesting smell, but it held my teflon sheet well on my shirt while doing heat transfer designs with my heat press. I suggest using either a tape holder or scissors to cut the size piece needed. It stays in place even after shifting the shirt around until I was ready to remove the tape. The tape came off easily and left no residue behind. The rolls have a lot of tape which is very thin so it will last for many uses. Its a great asset for holding my designs in place while heat pressing! At just under $2.25 per roll, these are a good value.
-
sam collins
> 24 hourThe tape held my product in place! Did not melt with 390° heat!
-
Amber L. Comer
> 24 hourI use this tape for wrapping my sublimation tumblers and cups. Peels super easily leaves no residue. Highly suggest this brand.
-
JBM
> 24 hourThis pack of TSSART 4Pack Heat Resistant Tape - Blue Heat Press Tape 0.4 inch Wide 108FT Long for Vinyl Sublimation Heat Transfer Application, Oxidation and High Temperature Resistance Easy Peeling Residue Free sublimation crafting tape works well. Im a rookie with sublimation heat transfer projects, but so far, this tape is great for keeping my paper from moving about under the pressure and also peels off easily without leaving any tackiness behind.