Ultrasonic Cleaner Solution for Carburetors and Engine Parts, Ultrasonic Cleaning Solution and Washing Compound for Ultrasonic and Immersion Washers - Concentrated (32 Ounces)
-
Bill Fowler
> 24 hourI tried this product and used the water to solution ration that was recommended after the effective solution I was buying from Amazon wasnt available. I had the water temperature HOT. This solution didnt do much for melting/removing light surface dirt or grease. I added more solution to see if that would make it effective. It did nothing to help remove it. So, I wouldnt buy this solution for an ultrasonic parts cleaner if youre trying to clean and remove oil/grease and other things from carbs or fuel pumps.
-
Jjchristian406
> 24 hourTook no time at all to get rid of some gnarly buildup on the carb. As with the brass cleaner they sell, it’s super concentrated so it lasts a long time! Love this. Add it to your maintenance arsenal - you’ll be glad you did.
-
mike
> 24 hourWorks well kinda expensive seems to last awhile
-
Outdoor Power Sports Promotion
> 24 hourI used this by itself to clean a carb and was surpised how much dirt came off by itself. After my ultrasonic cleaner arrived I filled it up with this and I think its the solution to parts cleaning like this.
-
charles m smoak
> 24 hourThis solution works great on highly gummy,like cosmaline(sp?), carburetors. Im sure it will clean many other projects including projectile dispersing tools .
-
Ryan Ramsey
> 24 hourDidnt clean nearly as good as other brands. We had to take them back out and re-clean. Even left a residue at the most watered-down ratio. Increasing solution did little to alleviate this. Plus, you cant send it back. Pretty lousy setup. Will definitely buy locally next time.
-
dave
> 24 hourCleans well and goes a long way. A few times I run my ultrasonic cause it’s a cheaper one but I could do it with one go due to this cleaner
-
Brian
> 24 hourThe solution smells familiar, like ZEP degreaser, but soo much more powerful! Money well spent. Recommend
-
Rico C.
> 24 hourSays to mix 5 parts water to 1 of the product. I needed to clean a 40-year old Super E plus the backing plate and the manifold - looked like theyd never been cleaned before - baked-on stains inside and out. I heated the mix to about 60C before dropping in the parts, then let it run it for 40 minutes. Everything came out sparkling, brand new looking. I wont use this every time but for parts with years of caked-on dirt and stains it was well worth it.
-
Jared wright
> 24 hourIt doesnt turn your aluminum grey. I use it lightly 1-9 instead of 1-4
|
|
|
|
|
|---|---|---|---|
Breaks Up and Removes Carbon, Dirt, Grease Residue and More!When the bubbles implode contaminants are quickly and safely blasted away from wetted surfaces without damaging delicate carburetor parts. |
Scientifically EngineeredOnce parts are placed in the cleaner basket with this ultrasonic cleaner for carburetors solution, and cleaning initiated, parts can be very quickly cleaned in an safe and friendly manner. |
Advanced Concentrated Cleaning FormulaThis concentrated carb cleaning solution is formulated to take advantage of the ultrasonic machines implosion of billions of minute vacuum bubbles when they contact parts immersed in our ultrasonic cleaning solution. |
Multiple Use CasesMultiple Use Cases Perfectly designed for you car carburetor cleaner, motorcycle carburetor cleaner, ultrasonic carb cleaning kit, engine components, heads, valves, seats, rockers, and more. |
|
|
|
|
|
|---|---|---|---|
Contains 100% High- Energy Solvent TechnologyOur carburetor cleaning fluid has been formulated specifically for use in an Ultrasonic Cleaner machine and works very well with carburetors, valves, fuel injectors, engine parts etc. and gives amazing results with many alloys used in engines. |
PH Neutral and Friendly To The EnvironmentThe solution is non-hazardous to dispose of (i.e., it may be flushed down the drain), but be aware of contamination from the item you"re cleaning. Please verify your local disposal guidelines and restrictions. |
Safe on All MetalsThis Ultrasonic solution is safe on all metals including aluminum, aluminum alloys, brass, cast iron, copper, copper alloys, ferrous metals, magnesium, yellow alloys, zinc, and coins. Does not contain borates, phenols, nitrates or butyl cellusolve. |
Scientifically Formulated for Ultrasonic Cleaning MachinesThe fluid can be reused until it becomes unclean. Although there is no set guideline for when to replace the fluid, the purpose of an ultrasonic cleaner is to clean deeply and thoroughly. Solution is usually in need of replacing after 2-3 normal uses or after it looks dark and dirty. |
Check Out Our Other Cleaning Products
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Ultrasonic Multi Enzymatic Cleaner Solution | Ultrasonic Brass Cartridge Cleaner Solution | Ultrasonic Gun Parts Cleaner Solution | Click for more details | Ultrasonic Gold Jewelry Cleaner | Ultrasonic Eyeglasses Cleaner | |
| Size | 1 Gallon | 1 Gallon | 1 Gallon | 32 ounces | 16 ounces | 16 ounces |