Vibra-TITE 440 Purple Hydraulic and Pneumatic Anaerobic Thread Sealant, 250ml Bottle

(412 Reviews)

Price
$18.25

Size
Quantity
(30000 available )

Total Price
Share
23 Ratings
14
2
1
3
3
Reviews
  • Henry G.

    > 24 hour

    I used this to seal all the fittings on my rotary screw air compressor and all the piping/attachments. This ix EXACTLY what I have been looking for. I have had ZERO leaks and the viscosity is great. Pipe dope is gummy, and tape is just crap. I am here ordering my second bottle I was so pleased with it, and thought I would write a review. Im shocked Vibratite is not a household name, but Loctite is. I would also recommend trying the VC-3 for normal threads you dont want backing out from vibration. I also love that product and it lead me to try this product.

  • VLADIMIR B STRULEV

    > 24 hour

    Have not used it yet, so no comments on its functionality. The 50ml bottle is only 1/3 or even 1/4 full. The bottle looks intact with no signs of leaked fluid from it. Feel like I was fooled by vibra-tite so no more business with them. I suggest you stay away as well. --------------- I would like to take my words back. Here is the direct quote from vibra-tite: Anaerobic products such as threadlockers and retaining compounds cure in the absence of air. It is necessary to have a sufficient volume of air within the container to prevent the product from hardening. This is why the product bottle feels empty.

  • Arlie McDermott

    > 24 hour

    Works great - just as advertised.

  • T. Cruit

    > 24 hour

    Worked well for several 1/4in NPT hydraulic connections.

  • George M.

    > 24 hour

    I have used Loctite hydraulic thread sealant in the past and this time tried to save some money. BAD DECISION !! About half the threads leaked even though immaculately clean and liberal coating, some sealed on second try, some didnt. The product seals about half the time !! I never had any problems with the Loctite product, it just works EVERY time ! I plan on throwing out what is left, it caused me enough grief !

  • SCOTT BRADY

    > 24 hour

    works great.

  • Fordtruckfan89

    > 24 hour

    Worked great to seal the fittings for a remote transmission cooler base.

  • Robbie Link

    > 24 hour

    This is a great thread sealant for air compressor fitting. But downside is when I got the bottle only 1/4 of it was full. Not sure why that is.

  • Oly Fish

    > 24 hour

    It seals threads used in high pressure hydraulic fittings. Does a fine job.

  • Smario

    > 24 hour

    It seems like good stuff but it came with not even half full.

Vibra-TITE 440 High Pressure Threadsealant is a fast curing high strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2" in diameter, resisting high pressures and vibrational loosening. This product has excellent solvent resistance and withstands temperatures to 300 degree F. Typical applications are hydraulic and pneumatic fittings, servomechanisms and fine filtration systems. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the bottle directly onto threaded parts. Fixture Speed with Activator is <30 minutes. Fixture Speed without Activator is 4 hours. Shelf Life is 12 months at 68 degree F. 24 hours at 68 degree F Full Cure Time. Product should be stored in a cool and dry location at temperatures between -10 degree C to 30 degree C. Optimal storage is 22 +/- 4 degree C. Shelf life is 18 months from date of manufacture when stored at 22 +/- 4 degree C. For fluid, power and gas system connections. Pneumatic and hydraulic sealant for fluid, power and gas system connections. 0.007 inches Maximum gap fill. 10000 PSI Sealing pressure. 30 Cure speed (minutes). N or T Suggested primer. 250 ml Bottle.

Related products

Shop
( 581 Reviews )
Top Selling Products