Vibra-TITE 440 Purple Hydraulic and Pneumatic Anaerobic Thread Sealant, 250ml Bottle
-
JAMES H.
> 24 hourAnaerobic curing means it cures when there is no oxygen. The bottle seems empty but it needs oxygen so it does not harden. Will buy some soon.
-
Primera_Al
> 24 hourWorked great on my tractor. It sealed the hydraulic connector and it’s held up like I’d hoped it would.
-
Smario
> 24 hourIt seems like good stuff but it came with not even half full.
-
MasterTacoChief
> 24 hourThe sealant that came with my Quickjack car jack wasnt working and it was leaking ATF through half the joints. I decided to try this instead. Pulled everything apart, degreased with brake cleaner, added this and reassembled. No leaks! Make sure to allow for curing time before use.
-
Fordtruckfan89
> 24 hourWorked great to seal the fittings for a remote transmission cooler base.
-
George M.
> 24 hourI have used Loctite hydraulic thread sealant in the past and this time tried to save some money. BAD DECISION !! About half the threads leaked even though immaculately clean and liberal coating, some sealed on second try, some didnt. The product seals about half the time !! I never had any problems with the Loctite product, it just works EVERY time ! I plan on throwing out what is left, it caused me enough grief !
-
D. S.
> 24 hourFilled only a 1/4 of the way!!! These are 100ml bottles and should have 50ml of product, therefore it should be 1/2 full. Same thing with their 137 threadlocker 50 ml bottle. Vibra-Tite might be as good as Loctite, unfortunately you dont get the quantity you paid for.
-
300k
> 24 hourIt works. Just remember no oil can be in the joint when you use this sealer. Clean everything , use solvent if necessary.
-
SCOTT BRADY
> 24 hourworks great.
-
VLADIMIR B STRULEV
> 24 hourHave not used it yet, so no comments on its functionality. The 50ml bottle is only 1/3 or even 1/4 full. The bottle looks intact with no signs of leaked fluid from it. Feel like I was fooled by vibra-tite so no more business with them. I suggest you stay away as well. --------------- I would like to take my words back. Here is the direct quote from vibra-tite: Anaerobic products such as threadlockers and retaining compounds cure in the absence of air. It is necessary to have a sufficient volume of air within the container to prevent the product from hardening. This is why the product bottle feels empty.