VViViD Air-Tint Self-Adhesive Headlight Tinting Vinyl 12in by 24in 2-Roll Pack (Light Smoke)

Honestly the product is great the light smoke is dark enough to hide the chrome in my light housing instead of replacing the lights but also light enough to barely effect the lights output itself ! As far as application goes Ive worked with vinly but never over a light so learning curve indeed will probably reorder again at some point and give it another shot so its perfect! If your hesitant like I was just do it !!

I used this film to cover concave headlights on my 65 Mustang. Ive done wraps before but never dry adhesive. Really struggled with the first one trying to get the wrinkles out. My mistake was using a blow dryer and not cutting the material to be just slightly wider than the headlight. On the second headlight I cut a circle about 1 inch larger than the headlight and used my heat gun to flatten it out before I removed the backing. Because it comes in a roll it kept wanting to roll up on my but the heat flattened it out nice. After I laid it out on the headlight I gave it heat and it laid right down. When heated it streches really well. Trick is to do just a little at a time. Anyway, Im stoked at how great the headlights look. Worth all the work.

Works ok, but has an apparent patter that Im not a fan of. The big issue I had was that it arrived damaged, after using about half of what I ordered on one lens, I went to use the other half and couldnt. I noticed what looked like a fish eye that turned out to be an area that the adhesive layer was damaged on and not usable. Due to time frame on this job I had to just peel the first lens and use a different product on both so they would match. I wasted money on this that cant be refunded due to product being partially used. I wont be a return customer.

Adhesion is great even though it might be somewhat difficult to install to a newbie like me but after a few tries it works very great and looks even better only downside is that the light output get diminished a little bit so be aware of that

I bought it to cover the headlights in my R32 bcs they was starting to yellow for the 100th time.... this tint hides the yellowing and makes them look 1000 times better it does cut down on the light output but its not too too bad. Id say if youve never wrapped anything before buy 2 orders of this incase you mess up but I got alot of comments at the car show

The product is excellent, the problem is us people who doesn’t do this for living you know !?!?! So to install wasn’t like super easy that’s all

This wrap is pretty much exactly what I expected, which is a good thing! I purchased it solely to tint the headlight on my motorcycle (see pic), but am now considering using what’s left on my truck’s headlights as well. I will mention that the face of the headlight I used it on is a completely flat, smooth surface so I can’t speak for it’s ability to bend/adhere around corners and edges. What I can say is that for my purpose, the wrap went on in a snap and looks great, I didn’t have any problems with wrinkles or creases and I can tell they would be easy to work out with a heat gun or blow dryer. For the $10 price tag and the sick touch of customization it adds, I couldn’t give this product anything less than five stars all the way. It’s easy to work with and I’m confident the adhesion is solid (as long as you use lots of heat!). As for longevity, I’ll have to update on that down the road since I’ve just installed it but my first impressions are very good. If you’re on the fence like I was, give it a try I bet you’ll be glad you did!

I will say the material is more forgiving than you think but at same time the more you heat it up, the more brittle it becomes. I pulled it up several times to fit the corners of my 3rd brake light on my F150...and overall I am happy with results.....1 hour of work and only few bucks outta my pocket. Great thing is that it can be removed... no paint, plastidip mess etc. I do recommend this item.

The adhesion is awsome and the installation is very easy

Just saved myself $100s of dollars!!! Highly recommend this product. Took a few tries to figure this out, but make sure you ONLY heat the middle. I live in Las Vegas & but the edges with heat & the vinyl shrunk back to its original form, so do be careful with that. I used masking tape, but honestly if & had knife less tape, the cutting of the vinyl would have been 10x easier. So if you can, use the knife less tape. Watch many videos of the install so you can mail it the first go around.