Yak-Power Battery Terminal Connector with SAE to Spade Pigtail
-
Jerry reed
> 24 hourGood
-
MMcBride
> 24 hourThis connects firmly at battery end with spade connection. The SAE boot is a little non-standard and did not insert fully into battery charger. A small gap exists where you can see the electrical connection (not ideal for my kayak setup).
-
Cody
> 24 hourGreat product. Connections for tightly
-
Goran
> 24 hourInstalled this on my Hobie Outback and it was very well made and looks like it will last a long time.
-
Joe R.
> 24 hourDid what it said
-
neil morris
> 24 hourPay attention to the red and black wires. As the picture shows, if you plug this extension into the tack attack battery box, the polarity will be reversed. I had to cut the wires and switch them on mine. Otherwise, its a nice extension. I give it 3 stars because of the hassle.
-
Dr. Darrell Schmidt
> 24 hourIt works, but I had to grind a bit off the battery terminals for it to fit.
-
fidel s.
> 24 hourQuality was excellent
-
Chip
> 24 hourBe aware that this product does NOT follow conventional wiring colors. RED is NEGATIVE, BLACK is POSITIVE. WTF?
-
A C
> 24 hourThese definitely don’t work for what their for. Supposedly their suppose to work with the yak power system but plug is too big! I wouldn’t recommend getting these!
Simpler Batteries
The Battery Terminal Pigtail allows you to plug the Power Panel Switching System, a Power Port or your 12-volt accessory with a Power Plug directly to a 12V battery so you can spend less time wiring and more time fishing!
Included Items and Compatibility
The pigtail includes a watertight, booted fuse holder and a 15A fuse. It also comes with two ring terminal adapters for use with larger batteries that don’t have spade connectors. Also, it is available in 1ft (YP-BTB12) and 8ft (YP-BTB96) lengths. The Battery Terminal Connector with SAE to F1 (3/16) Spade Pigtail is compatible with the following:
- Power Ports: YP-PMC48S, YP-PMC96S & YP-PMC144S
- Power Panel Switching System: YP-RP5R
- Power Plug: YP-SAE4
Connection Dangers
Note: Always make sure the Yak-Power plug-and-play connectors are completely pushed together when connecting the system. We use our own custom tooled, high tolerance, very snug fitting SAE connectors with larger gauge, real copper wire to ensure a quality, weatherproof and reliable connection. All Yak-Power plug-and-play accessories are designed specifically to work together while maintaining the correct battery polarity throughout the entire YP system. Using other aftermarket connectors or splicing other connectors into our system may cause damage to the system or the accessories connected to the system. ALSO, make sure to pay attention to the wire colors of all YP accessory cables to ensure that the red (+) wire is always connecting to the red (+) wire on the connector into which it’s being plugged.