1/8 (3mm) Dark Red Translucent Acrylic Plexiglass Sheet 12x12 Cast (0.118) Thick Nominal Size AZM

1/8 (3mm) Dark Red Translucent Acrylic Plexiglass Sheet 12x12 Cast (0.118) Thick Nominal Size AZM - $11 - nominal size is before cutting, actual size is about 11-7/8 square. I peeled back a corner, front and back, for a quick test in front of a large LED display. The red LED does show through, but I think the 1/8 thick dark red acrylic will cut too much light for my application...Id estimate a 50% cut of the red, and nearly 100% cut of everything else. It *is* a beautiful dark red. Shipped flat in a thin package, arrived in good shape. edit: cut OK on laser, moderate odor needs outside venting during cut. Leave the white plastic cover on both sides, dont peel it back...it made a bit of a mess where it floated above the red acrylic. Peels off clean later.

Cuts easily in my CNC, transparency and finish is consistent across the panel. Happy with the sheet for my intended use.

I uses this red plastic to make a filter for a high intensity led light bar on my boat. Works perfectly and doesnt riun my night vision.

I had a 2 hole in my taillight and this fixed it. Its been about a month ago and no sun damage at all. I used stainless steel screws, drilled a few holes, and installed it. Now my car is street-legal again. I expect this will hold up for the years to come. Very happy.

I wanted a filter to add onto outdoor low-voltage lighting: durable enough for the weather, color-saturated for a strong color projection on the up-lights but transparent enough to not over-dim the lights. This worked perfectly. Keep in mind that this is a thick, stiff plastic. Its not something you can cut to shape with scissors - you need a fine-tooth coping saw to cut it. Treated roughly it can crack - as I found out using a coarse saw! Over LED lighting it worked well, but over incandescent lighting the heat -might- warp it. I bought a GREEN sheet from another Amazon vendor for less than 2/3 of this units price, so I think theres room for improvement there. Id certainly buy it again - it was exactly the product I wanted - though Id see if a better was available.

Great quality cast acrylic. This is translucent which was exactly what I was looking for. The thickness was enough to be sturdy, but not too much to be cut with a diode laser after a couple of passes.

Beautiful dark red color, high clarity, no decay.

perfect red color and not one scratch upon receiving the glass.

Screwed up delivery, but no product complaints

Technically speaking this product is TRANSPARENT, NOT translucent. Transparent means you can see through it, translucent means you cannot see through it except light if a light is shining behind it. (Opaque means you can’t even see light through it.) Because of the mislabeling I wasn’t sure if it was what I needed. I took a leap of faith based off the pictures (and bc Amazon has such a great return policy I could return it if it was wrong) and bought it anyway. Since it is transparent, it is EXACTLY what I needed! Please advertise correctly... it might help people like me get what they need! I know there are many other people in the art community that need red transparency for their value studies before they do their actual work! Thanks! As far as the product is concerned, it is very nice!