1/8 (3mm) Dark Red Translucent Acrylic Plexiglass Sheet 12x12 Cast (0.118) Thick Nominal Size AZM

perfect red color and not one scratch upon receiving the glass.

We wanted to have a light in the horse stall that wouldnt interfere with her night vision. This was used to cover the leds of a night light that turns on with movement in the stall. Seems to would okay and is sturdy and dims the white light from the leds to a lower level.

I had a 2 hole in my taillight and this fixed it. Its been about a month ago and no sun damage at all. I used stainless steel screws, drilled a few holes, and installed it. Now my car is street-legal again. I expect this will hold up for the years to come. Very happy.

Great quality cast acrylic. This is translucent which was exactly what I was looking for. The thickness was enough to be sturdy, but not too much to be cut with a diode laser after a couple of passes.

1/8 (3mm) Dark Red Translucent Acrylic Plexiglass Sheet 12x12 Cast (0.118) Thick Nominal Size AZM - $11 - nominal size is before cutting, actual size is about 11-7/8 square. I peeled back a corner, front and back, for a quick test in front of a large LED display. The red LED does show through, but I think the 1/8 thick dark red acrylic will cut too much light for my application...Id estimate a 50% cut of the red, and nearly 100% cut of everything else. It *is* a beautiful dark red. Shipped flat in a thin package, arrived in good shape. edit: cut OK on laser, moderate odor needs outside venting during cut. Leave the white plastic cover on both sides, dont peel it back...it made a bit of a mess where it floated above the red acrylic. Peels off clean later.