180 Pieces 1 Inch Sanding Disc, GOH DODD Wet Dry Sandpaper with Soft Foam Pad and Backing Pad 1/8 Inch Shank, 60-10000 Variety Grits Grinding Abrasive Sand Paper for Auto Metal Wood Grass Jewelry
-
R. S.
> 3 dayThese sandpaper discs are perfect for headlight restoration. Way easier than sanding by hand. You only really need 800, 1200, 2000, and 3000 grit to get the job done. Headlights came out like new after buffing and Meguiars UV protectant afterwards.
-
RS from LA
> 3 dayI took off one star on durability, as I dont know how long these disks will last. I use them to sane polymer clay, so time will tell. Each grade of sandpaper comes in a separate baggy which is labeled, but it would be useful if each disk could have a label printed on it.
-
Stephen
> 3 dayI liked that it came so fast.
-
M. L. Roberti
Greater than one weekFor the money, this is a nice set
-
ppal
> 3 dayNo grit labels on them, how is someone supposed to pick them
-
Brianna
> 3 dayNot bad for first try, but should have used a lower grit to smooth out more before going to a higher/finer grit and this would have eliminated the visible scratches. My photo shows the result with the sanding kit on Amazon (left) compared to the other side of the jewelry that looks very shiny from the resin mold (right). I couldnt get the sanding kit to make it as shiny as the mold even after using a polishing liquid, but its not bad. Again, this was my first try. I actually had to sand down quite a bit of resin that had overflowed the mold, so Im impressed for my first attempt!
-
frank
> 3 dayVery good
-
Debi
19-11-2024Everything as said
-
Mike
> 3 dayHave no hesitation purchasing this kit, theyve addressed the labeling issue! All grits came in separate ziploc bags labeled on the outside, all bags were in a larger ziploc with the pads. Very easy to identify each grit, you can keep them organized as is or add them to your current grit organization setup. Soft Buffering pad is perfect for sanding the inside of bowls on the lathe, conforms to the hard to reach bottom curve for a nice clean finish.
-
Nazar S.
> 3 dayI originally bought this for headlight restoration thinking I’m about to get all the grits I need for a cheap price. The smaller grit sizes sand fine but clog after about a minute. After this I decided to wet sand so it wouldn’t clog as easy but this made the sandpaper dull after about a minute. Once I was ready to get the headlight ready for polishing at the higher grits such as 2000 then 3000 the sandpaper would leave swirl marks I just could not get rid of. Switching to a fresh pad helped but only for a short few seconds. I thought this was because the dust would clog it up. So I cleaned the headlight and started with a fresh pad. Still could not get rid of the deep swirl marks. One week later I ended up getting high quality 3m pads as well as the 3m Trizact finishing pads and immediately was impressed how much material they removed. I went back with the “5000” grit sand paper and it left swirl marks even though I used “3000” grit 3m trizact disk before. Last time I checked that’s not how sand paper should work. Over all I am giving this sand paper 3 stars and not 1 because for something that is not transparent like wood or metal, I could see this as a good budget sand paper.