2 Pack Wire Wheel Brush Wire Wheel Brush for Drill Attachment, Rocaris 2 Inch Heavy Duty Wire Brushes Removal Paint Rust & Corrosion, 0.0118 Carbon Steel Wire, 1/4in Shank, 20000RPM

Both brushes in the package appear to be the same grit. The wire is stiff and strong enough for aggressive jobs. The wires appear to stay on while grinding (or not fall off), which is a good sign. It seems well made.

I am restoring an antique cast iron dinner bell that has sat outside for about a century and then in a barn. I needed something to take all the rust and stuff off of it. These work great for that purpose. It is a large bell and 2 of these were perfect.

Small diameter and very stiff bristles, but there are times where they might work better than larger wheels. If youre only going to have one wire wheel though, a brass 4- or 5-inch wheel would be an all-around better choice.

I tested in with the high-speed setting on my DeWalt drill to remove rust from a piece of scrap sheet metal. After ~30 seconds it came off with no issues, and I could have cleaned it up much more if I spent longer doing it. This shouldnt be used for big flat jobs like this since its such a small wheel, but the size makes it great for getting into nooks and crannies. After that work, there were no bent wires, even after I pushed the corners of the wheel into the sheet to try and bend them. Nothing came off, so in the short term it looks like this is a well made piece!

I used these to descale and remove decades of rust and rust pockets from a cast iron cauldron before resealing with rust prevention paint. Bristles held up well and did not deform under moderate pressure, which I would advise with this type of drill attachment (as well as a moderate speed.) ALWAYS wear safety glasses when using these types of wire brushes because individual wires can break off. These held well because Ive used plenty of similar products for many years, and starting with a light touch and slowly ramping up will help you sustain a safe project. Easy to chuck, gripped well in chuck, and lasted much longer than others Ive used in the past. Would order again.

These wire wheels work well on a drill or in a drill press, but the relatively slow speed of a drill, and therefore slow speed of progress in removing rust, would lead me to use another tool if possible. These small brushes could be handy for hard-to-reach situations when it is not possible to either bring the work piece to a wire wheel on a bench grinder or reach the work area with a wire brush on an angle grinder. In a high-speed hand air tool, a small wire wheel like this would work much better than on a drill.

wheel brushes are well made and a good value for the price.

They seem well made and like they will last. I used one to shine up and clean a pipe, and it worked great.

I used this with my DEWALT drill and worked amazing, I’m actually working on my patio and this is helping a lot to remove rust in not time!!

I had a small garden statue, which was rusted. I need a tool to sand off all of the rust, before I painted it. This wire wheel brush did the trick.