2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
JERRY
> 24 hourSuper easy set up, and now I can finally stream movies & music all over the house - no more dead spots!works great. I had to replaced my other extender after it died. this one works great.
-
Kravie
> 24 hourSehr wertiges Kabel. Toll ist auch der Gummischutz ueber der Entriegelung.
-
Hans Oor
> 24 hourWorks better than any other. I use it in my living room and opted to connect everything to it since it boosts the signal even outside about 25 feet away.
-
Grigory Gofman
> 24 hourGood signal strength. Great range. Simple set-up. Piced right. I have nothing but praise.Wow! This one is it! Getting great fast 5G coverage anywhere in the house.
-
Santiago
> 24 hourFunciona como se espera que tiene que funcionar. Curiosamente el que compré yo, de 10m, es más barato que el de 5m
-
KEITH
> 24 hourWorks perfect. You have to remember when expanding your wireless network your never going to get the same speeds as the router. My speeds go from 7 MB/s with my router to 2 MB/s with this but thats way more then enough to do what i needed to. The range on it is good and i never had any issues with it!
-
BENJAMIN
> 24 hourTook minutes to install, and no longer have any dead spots in my home. The wifi receiver is on the second floor, the device in on the 1st. Id say the circular range is at least a 30ft diameter
-
JEREMY
> 24 hourHelped to extend wi-fi range to my upstairs rooms with wireless router downstairs. Set up was a little confusing but got it set up in about 30 minutes. Happy so far.
-
JOYCE
> 24 hourGood piece of equipment. I bought this because my room did not have a good connection to the main wifi since it is on the other end of the house. As long as you follow the instruction booklet that comes, and register correctly online, it works perfectly.
-
KEITH
> 24 hourSo far so good. Had I programmed it the correct way the first time, would have been one of the quickest installs Ive experienced. Devices works great and I can now heve Wi-Fi outside.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.