4 Pack Knotted Wire Wheel Brush for Angle Grinders, WENORA Wire Brush for 4 1/2 Angle Grinder with 5/8 Inch Threaded Arbor, with 5/8 Inch Arbor for Heavy Cleaning Rust, for Grinder

On par with the guys down at the harbor; a few cents cheaper. These are wear items and seem to stand up to abuse pretty well. I have been grinding the rust off the old work trucks. I like the slight cant of the bristles so it’s not quite a cup and I’m not quite a wheel. Seems to make it a little more maneuverable in tight spaces with odd shapes.

The wires angle down below the center disk, very helpful when brushing corners. They hold up well.

These wire wheels look good quality. Ill be using one later on and Ill update the review if it flies apart or anything like that. The one thing that is a little different about these is that the angle of the wire is less than the ones Ive been using. Im interested to see if that angle is good for getting into tighter spots.

This is a really good wheel brush for stripping off rust in tight spaces where a stripping wheel wont work. The wheel brush works extremely well and makes short order of rust. What I do want to stress is that you must take the necessary safety precautions when you use these types of wheels - remember, these are strands of hard wire spinning at an extremely high speed and a wire will break off from time to time and will act like a dart, so it would be ideal to wear safety goggles and a face shield (Jackson Safety Maxview and Honeywell UVEX Bionic are 2 really good shields), long sleeve shirt, jeans, and boots (no flip-flops) - a welding apron would be ideal (it may seem like overkill, but safety first). As for the wheel brush, I cant recommend it enough - it just worked freakishly well and stripped out the rust ridiculously fast on the iron chairs and benches in my patio; they wound up looking like new. Its a really great wheel brush that works extremely well. Remember - safety first.

Used these wheels to sand down and clean a stock trailer for pain prep. They definitely held up and there’s lots of life left in them. Absolutely with the money.

The wires angle down below the center disk, very helpful when brushing corners. They hold up well.

It should work well!

Seem to be durable and long lasting with a little breakage to be expected and with a good amount of down pressure these clean pretty fast. I agree it is a given- always wear eye protection with any wire wheel especially considering that these are somewhat expendable, and it may be a while- but they will eventually be worn down to knubs. Fits my angle grinder and tightened on easily and they handle a lot of down pressure when using. Good- coarse grind- cleaners.

I wouldn’t recommend these for cleaning up welds because they are too course and slightly cupped. They did a good job of cleaning rust off the truck frame before undercoating though.

Used these wheels to sand down and clean a stock trailer for pain prep. They definitely held up and there’s lots of life left in them. Absolutely with the money.