4 Pack Knotted Wire Wheel Brush for Angle Grinders, WENORA Wire Brush for 4 1/2 Angle Grinder with 5/8 Inch Threaded Arbor, with 5/8 Inch Arbor for Heavy Cleaning Rust, for Grinder

Got this kit to remove loose paint and rust on a steel square tube Wrought Iron style fence, mounted this first wire wheel on our Milwaukee cordless grinder and have been diligently stripping paint layer after paint layer along with spots of rush and some slag on our welds from installation. These wire wheels are truly heavy duty and very reasonably priced. Ive ground for hours now and the first wheel is still going strong!

great for removing rust off steel pipes. they work great

The wires angle down below the center disk, very helpful when brushing corners. They hold up well.

Heavy duty wire wheel for heavy paint and rust removal. Instead of single wires which can fly off when brushing these heads have many twisted wires which holds them together and lets you really get after the rust. They screw onto the threaded shaft of the grinder. If your grinder has a guard around the wheel make sure it can accept a 4 1/2 wide attachment. These are rated up to 12,500 RPM but I cant imagine anyone needing to run them that fast. They clean surfaces pretty aggressively.

Seem to be durable and long lasting with a little breakage to be expected and with a good amount of down pressure these clean pretty fast. I agree it is a given- always wear eye protection with any wire wheel especially considering that these are somewhat expendable, and it may be a while- but they will eventually be worn down to knubs. Fits my angle grinder and tightened on easily and they handle a lot of down pressure when using. Good- coarse grind- cleaners.

These screw onto my Dewalt angle grinder perfectly and do a great job at removing rust and other materials from surfaces that I need to be cleaned up. The braided wires last longer and are stiffer than the wheels that do not have the braided wires. I will never go back to non-braided wire wheels again as these last longer and remove more surface material quicker. I also like to use these wheels on my welds to kind of clean up the spatter and some of the burn marks.

Seem to be durable and long lasting with a little breakage to be expected and with a good amount of down pressure these clean pretty fast. I agree it is a given- always wear eye protection with any wire wheel especially considering that these are somewhat expendable, and it may be a while- but they will eventually be worn down to knubs. Fits my angle grinder and tightened on easily and they handle a lot of down pressure when using. Good- coarse grind- cleaners.

These are rust eating wheels if you can stand the flying wire. BE SURE TO WEAR EYE PROTECTION WITH THESE WHEELS. A full face shield is best.

for the cost of one from a local big box store you get 4 wire wheels in this set. Granted you get what you pay for so the overall quality is lower on each one. That being said they still work and do exactly what is needed. Like all wire brushes the wires wear and break off or can just come out and they do so with enough force to stick into clothing or skin. But these wheels are great to remove rust, paint and clean up welds

Used these wheels to sand down and clean a stock trailer for pain prep. They definitely held up and there’s lots of life left in them. Absolutely with the money.