5Aplusreprap 12Pcs Adjustable 3D Printer Ender 3 Pro Glass Clips Clamps Compatible with Ender 3/3 Pro/V2/3S, Ender 5/Pro, CR-20 PRO, CR10/10S Pro, 3D Printer Heat Bed Clips
-
M. Caron
Greater than one weekI have them on all 3 of my printers. They hold much better than the binder clips and have a lower profile. I highly recommend this reasonably priced upgrade.
-
Shane D
> 3 dayThere appears to be a quality control issue. They work as attended however only two are the exact same.
-
Logan
> 3 dayThese clips hold my bed on without issue. I am not able to swap out glass plated with ease and quickly change bed material print to print. Id recommend these if youre printing on a glass sheet that you dont want to adhere to the aluminum. Im personally using these on both an Anycubic Chiron and an Ender 3.
-
thomas carroll
Greater than one weekOne was stripped other than that the others work good
-
steve
Greater than one weekwork well with the enders and Im happy nothing moves. NO shifting and Im happy no more coming home to a birds nest. Worth buying oh yes look no further this works great and i love this item.
-
Willie H.
> 3 dayThese small aluminum c-clamps (with thumb screw) SECURE the TOP GLASS on heated bed of Ender 3 v2 printer - in most efficient way. These clamps are SUPERIOR when compared to “spring clips”, that came with Ender 3 v2 printer.
-
Richard Peña
> 3 dayI used these on the glass bed upgrade for a Creality CR-10 Smart Pro and they not only look very nice, they also do a great job of holding the glass bed in place. At 6cm from either side along the front/rear edges, they do not interfere with the self-leveling feature or any print jobs. I highly recommend!!
-
courtney
> 3 dayWorks great on all beds
-
Conner
> 3 dayThe only problem I have is that the black clamps sit a little high even when tighten down. I’ve noticed this with my printer so it might be different per person. But I noticed depending on the print the extruder will run into the clamp and jam it’s self. Again largely depends on what your printing.
-
Dillon Stehr
> 3 dayThey fit perfect and add more adjustability of bed surface
Compatible with these 3D Printers:
- Creality CR-10 / Creality CR-10S
- Creality CR-10-S5
- Creality CR-10-S4
- Creality CR-10 MINI
- Creality CR-20 / Creality CR-20 Pro
- Ender 2 / Ender 5/Ender 3 Neo
- Ender 3 /Ender 3 V2/ Ender 3 Pro
- TronXY X5S / Tevo Tornado
- Alfawise U20 / Lotmaxx SC-10
Description:
- Colour: Black
- The thickness of the clamping platform: 3.5mm-9mm
- Width of clamping platform: 15mm
- Adjustable, durable, not easily deformed.
5Aplusreprap 12Pcs adjustable 3D Printer glass bed clips
1. Adjustable, durable, not easily deformed.
2. Suitable for heatbed thickness: Small clamp for about 3.5mm-9mm.
3. Easy to use, strong scalability, durable, not easily deformed, easy to install and remove, make the hotbed glass platform more stable.
3D Printer Bed Clips
Ender 3 glass bed clips
|
|
|
|
|---|---|---|
The thickness of the clamping platform:The thickness of the clamping platform is 3.5mm-9mm. |
Advantages of this platform clip:New design with the anti-backlash spring defficiently revents the screws from loosening, improve clamping force. |
Reasonable Combination:The thickness can be adjusted according to the actual situation, sufficient quantity is suitable for you to replace. |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 5Aplusreprap Upgrade Ender 3 Hotend, CR10 J-Head Hotend 24V 40W | Dual Gear Extruder Single Connector Double Pulleys Direct Aluminum Extruder | M3 Stud Thermistor 100k ntc 3950 Temperature Sensor | 5Aplusreprap Upgrade 3D Printer Ender 3 All Metal Extruder Blue | NTC 100K 3950 Thermistors Sensor , Ender 3 Thermistor | ptfe teflon bowden tube for 1.75 filament | |
| Packaging includes | Compatible with 3D Printers: Creality CR-10, CR-10-S5, CR-10-S4, CR-10S, CR-10 MINI, CR-20, CR-20 Pro, Ender 2, Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, XY X5S, Tevo Tornado, Alfawise U20, Lotmaxx SC-10, etc. | 5Aplusreprap Upgraded 3D Printer Extruder，Dual Gear Ender 3 Extruder， | 3D Printer Thermistor 100k NTC 3950, M3 Stud Thermistor 100k ntc 3950 Temperature Sensor with 1 Meter Extended Cable Wire Use for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend, | 5Aplusreprap Upgrade 3D Printer Ender 3 Extruder Blue | 3PCS HT-NTC100K Thermistor Sensor Upgrade 3x15mm 3950 NTC 100K Thermistor | 5Aplusreprap Teflon Tube Blue PTFE Tubing (1 Meter) for 3D Printer Accessories Pneumatic Fittings PC4-M6 / PC4-M10 |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Assembled I3 Mega V5 Upgrade J-Head Hotend 12V40W | Upgraded to 500°C High Temperature I3 Mega Pro Hotend, V5 J-Head Hotend | V6 High Temperature Copper Plated Heater Block | V6 Brass Nozzles | 5Aplusreprap 12pcs Silicone Column Solid Mounts Black | Compatible with ANYCUBIC Vyper Hotend, Upgrade V5 J-Head Hotend 24V 40W | |
| Packaging includes | Compatible with Anycubic I3 Mega Hotend, V5 Upgrade J-Head Hotend 12V40W | This V5 J-head hotend is perfectly compatible with ANYCUBIC I3 MEGA, I3 MEGA X, Mega S, Mega Pro 3D Printer. | Compatible with E3D V6 Plated Copper Heater Block Use for PT100 Cartridge Sensor Version V6 Hotend Titan Aero Extruder… | Compatible for E3D V6 Nozzle, V6 3D Printer Nozzles, M6 0.4mm Brass Nozzle Extruder Print Head V6 Nozzles Compatible for 1.75mm Filament E3D V5-V6 3D Printer, 20Pcs… | 3D Printer Heat Bed Leveling, Silicone Column Solid Mounts, Leveling Spring Replacement Part | Compatible with ANYCUBIC Vyper Hotend, Upgrade V5 J-Head Hotend 24V 40W and 5X 0.4mm Nozzle, 2X Silicone Socks Compatible for 3D Printer ANYCUBIC Vyper Extruder 1.75mm Filament, |