5PCS A4 FEP Film for Elegoo Saturn 2, Saturn S, Saturn 8K, Anycubic M3 Premium, Mono X 6K, Photon M3, M3 Plus, Phrozen Sonic Mighty 4K LCD 3D Printers, 210x300x0.15mm Resin Vat FEP Film Replacement
-
Kurt
> 3 dayI used these on my creality halot pro and they worked great. I installed the film and then trimmed to fit. I had a successful print the very first time. I will continue to buy this film for my replacements.
-
orion
> 3 dayI had no issue changing out my old FEP sheet with one of these, the instructions were easy to understand and the change went very easy. I think that this multi pack is going to last me a long time, so for the price this was a great deal!
-
Peter W
> 3 dayI have a large resin 3D printer and when some of my larger models fail its because the film has lost its releasing capacity and then its time to change it out. With this film, its large enough so I can cut it size if I needed to for one of my smaller printers and the quality of the 3D prints are not affected by this film at all. Looking at some of my more intricate models, this seems to better at getting the details down to 0.06mm layer height and the corners are as sharp as they can be. Overall this FEP film is great for my uses and the clarity is perfect for 4k or even 8k resin printers.
-
Keirmeister
> 3 dayThe FEP was easy to install, which isnt necessarily a function of FEP sheets. But it helped me create some good prints. I think the failures were more about bad supports that any problems I had with the FEP. The sheets are also relatively strong.
-
SaraM
> 3 dayThis works with my husbands Saturn. It has no issues and works just like the other films he has used
-
Kate B.
> 3 dayI got this FEP and recently installed it in one of my resin printers. Installation was pretty straightforward with no issues from the FEP. The size of it is big enough to fit any of my printers that i have and they are all different brands. If you dont know you will learn but resin printing is faster than your traditional FDM printing and the part that wears out most is the FEP. That means having a good product on hand to do replacements is key and this product fits the bill perfectly in every regard.
|
|
|
|
|---|---|---|---|
| 140*200mm FEP Film | 200*260mm FEP Film | 260*380mm FEP Film | |
| Size | 140*200*0.15mm | 200*260*0.15mm | 260*380*0.15mm |
Compatible Models:
Elegoo Saturn 2, Saturn 8K, Saturn 4K, Saturn S;
Anycubic Photon M3 premium, M3 plus, M3, mono X 6K, ;
and other desktop LCD 3D Printers which has fep vat size no more than 210x300mm/8.26*11.8 in(L*W).
ATTENTION: This release film doesn"t have a frame, so it is not suitable for the models that need to replace with the release film with a sealed frame. If your 3D printer is Anycubic Mono 4K, please check whether your resin vat should be replaced with the film with a frame or not.
|
|
|
|
|---|---|---|
High TransmittanceMore than 95% light transmittance 3D release film has high light transmittance and light transmittance of more than 95%, which makes the printed products more perfect |
High Purity FEP ResinFEP release film is made of ultra-high purity FEP resin. It has excellent non-stick, high-temperature resistance, insulation, mechanical properties, and wear resistance characteristics. |
Tear off the protective filmIn order to prevent the FEP film from being damaged and friction between FEP film and FEP film, we have protective films on both sides of each film, please tear them off before use. |
|
|
|
|
|---|---|---|
Step 1Remove screws to detach the steel rings from the resin vat. Tear off the protective film on both sides and take out the FEP film in the middle. |
Step 2Put the new FEP film in-between the two steel rings and install those screws back. You may need to force the screw in. |
Step 3Use a utility knife to cut off the excess release film on the edge and ensure the FEP film is clean and tensioned properly |
