ABN Hollow Punch Kit Leather Punches Tools Hole Punch Set Gasket Punch Set Gasket Cutter 3/16 to 1-3/8in (5-35mm)

GOOD SIZES WORKS GOOD

Easy to use cuts perfect holes

Bought this so that I could cut some custom carburetor gasket for a machine that is obsolete and Parts are no longer available for. it worked perfectly.

It is a metric set with the inch equivalents. However the inch sizes are WAY off, as there is no metric and inch equivalents, for example, if you have a 6mm that shows a 1/4 being its equivalent, then 4 quarters is one inch BUT 4 6mm is only 24mm and an inch is exactly 25.4mm so 25.4 divided 4 is 6.35mm. This may not be an issue for you but for me it is unacceptable. When an items description states something I EXPECT it to be accurate and not misleading or just false. There is actually a federal law that forbids this practice, called false advertising. The pin pointer in the center is WAY off and not centered. The edge of the actual cutter itself is rolled or curled and not sharp at all. This is not a leather hole punch, or a punch that you can use for anything that requires a hole in it, meaning it cuts discs out of material. would not recommend that you cut chip board at a maximum thickness of 1/16. Anything with a thickness is either going to get torn or stretched out at the holes edge due to the angle that the cutter is sharpened at. The case has poor latches that dont stay closed. Furthermore, once a disc has been cut you have to disassemble it so you can remove it from within the cutter. Very poorly designed and quality is nothing short of junk. Returning this for all the above reasons, especially the false description By the way, ABN (the brand) actually stands for Auto Body Network...not a leather tool company, but sounds as though the are a Automobile Body tool manufacturer and trying to sell this as something it was clearly not meant to do.

Ive only made a few gaskets but this tool has worked well so far. It seems well made and the steel appears to be hardened. Im guessing that it could be used to cut thin metal sheet. I think its a bargain.

Exactly what my husband wanted.

I used these to punch through upholstered thin plywood. I liked the way the punch assembled and the punch part was easy to clean out. They did a fine job.

Differents size to use in my job and home

Trying to cut leather (soft suede .040” thick) against a soft wood board. It was dull after about 5 cuts. Very poor performance.

heavy duty.