ABS Plastic Sheet 12 x 16 x 0.06 6 Pack,Moldable Plastic Sheets,High Tensile and Impact Strength Plastic,Great for DIY Projects,Decor, Handcrafts ect

I have a laser cutter and do a lot of projects with acrylic and ABS. These ABS sheets from HYHOSHI are of great quality and are a really good value. Here’s what I like and don’t like about these ABS sheets: **************************************************** LIKES *Accuracy/Tolerance- these are high-quality sheets. I measured each of them with a set of calipers and they are a consistent .06 inch (1.76 mm) across each sheet. It’s nice to see sheets manufactured to such tight tolerances. *Thickness- the sheets are a consistent thickness with a bit of texture on one side. The .06 thickness is perfect for laser cutting without getting too much warping/melting on the edges. *Size- the 12x16 size is the perfect size to fit comfortably on my laser bed while still giving me a lot of area to fit multiple projects on each one. *Thermal Behavior- these sheets are thin enough to allow them to cut easily with a laser (make sure you have adequate ventilation) or you can heat them up with a heat gun and reform them over a mold. There’s a lot you can do with these. *Value- At $19 for 6 pcs (at the time of this review), this is a fantastic deal for ABS sheets of this quality in my opinion. That’s a little over $3 per sheet and I can get multiple projects out of each 12x16 sheet. I think that’s a great deal. **************************************************** DISLIKES *None! **************************************************** Overall I’m very pleased with these ABS sheets and would definitely recommend them.

I got these plastic sheets to use for patching cracked plastic corner trim pieces on some enclosed utility trailers that I own. Over the years these corners have cracked due to the weather and I cant get replacements. The corners have a curved radius that I can match by just heating these sheets and forming them to fit. They have a textured side or smooth untextured side, according to your need. I think this will work great and last for years.

I used these for small faceplates of electrical projects I have been working on. The material is thin and flexible, but that makes it easy to cut. Its easily bendable with a heat gun which I did to add some strength to the plate. I wouldnt use it for this application for a large plate because of its flexibility however. I am also planning to use this for a small dust collections shield but havent gotten around to that one yet. However given the experience Ive had so far, I expect it to work out well.

So far, I have used this to make a box with a sliding top and open ends to use with my C-pap. I place the box in front of the air intake and place a fiber pad with essential oil inside the box to create a refreshing breeze all night. The box turned out ok, but I did not have anything to use as a jig to get crisp folds but it still works. It cuts ok with a razor knife for straight lines. I think a couple of pieces of 1 x 4 boards and a couple of clamps would have worked to create the jig to get a crisp fold.

I requested these sheets to repair some rot on my trucks body panels before it goes in for Inspection. I like the fact you can cut these to size, heat them, and while hot shape them by using a good section of the trucks body panel. Once they cool I will fit them, make any minor adjustments and mount them by sanding, cleaning both surfaces, and adhere them with a 2 part epoxy. Once the epoxy has set, I will sand, clean, prime and paint with a matching color. It will not be a perfect body job, but it is a work truck, not a show car.

Its what is expected as per the description. Used it to make covers for speaker holes in a motorcycle tour pack.

With a little practice you can use these to make cosplay armor, masks, helmets, weaponry and more. Ive been scavenging this stuff when I could but did not realize what it was called. Now I know. $15 for 6 sheets? Wow. Great stuff at a great price.

Great for the value. And light weight. Go any wait to do my projects.

I used these to build sides of a truck bed on an RC truck I am building. They cut very easily with a pair of snips, and I used a grinding head on a Dremel tool to make finer adjustments. I used a heat gun to bend the sides up and it molded to the shape I needed very easily. It all glued down well with some shoe repair glue and some weight on it overnight and seems very secure. I did rough up the smooth side (the side I was gluing down) with a sanding block just to be safe. Im pretty happy with the product, and I have plenty leftover for my next project.

Im a model maker so I buy a lot of ASB sheets. I was out and needed some quick so I tried these. The cuts were all perfectly square which is important to me, there were no handling scratches or damage. Most places i get them there is always something wrong with a least one sheet, these were all perfect. I will definitely be getting more materials from this supplier. Thanks for a great product at a great price.