













Accessories Kit for Shark IQ R101AE (RV1001AE) IQ R101 (RV1001) Robot Vacuum Cleaner Replacement Parts Pack of Main Brush, Filters, Side Brushes
-
Murray Allison
Greater than one weekIt appears the roller fits perfectly, but when the Shark runs with the new roller, it sounds like a Crude Oil rig on hard floors and an Old Diesel truck on carpet. Shark had a few errors at the start of using this new roller until I reseated it a few times. Put the old original one back in and perfect again. You get what you pay for. The filter works fine though, thats why I made it 2 stars otherwise it would have been 1 as the roller is the part I needed most.
-
vicki duncan
> 3 dayThey are easy to install and makes a difference of how well the vacuum runs.
-
Theresa Rhymer-Billig
> 3 dayFillers are to small for our shark.
-
Alyssa Wallace
Greater than one weekEverything was just as advertised. Just make sure you double check the size of your filter in the housing. They came in short and long for different models.
-
j.shestak
> 3 daySome of these parts worked, some didn’t. So this product is not actually compatible with the Shark IQ R101AE. For example, the cylindrical filter is too short.
-
Thaddeus
> 3 dayFilters are of decent quality and the fit and finish is pretty good on them. The beater bar is of questionable quality and I initially noticed that it was VERY noisy on first use after installation. The second run, the RV (robot vac) kept erroring out with an indication of something under the robot. On closer examination, the bearing cap on the end of the bar had such poor design and fit that it was constantly running the end of the bar itself and when the RV stopped it would weld the plastic of the two pieces together. Thankfully I had saved the old bar and replaced the bearing cap on the new bar with the old one. The RV is running fine now. I also noted that the fins on the bar frayed almost immediately but it does not appear to be effecting the RVs performance.
-
adrian silva
Greater than one weekFilter fit, guide arms fit but the roller keeps binding up. I have shaved off a lot of buddys and finally added grease in-between the roller and the cap and so far it is still working. I had already thrown out the old roller or else I wouldve sent this one back.
-
Kallista Anne
> 3 dayThe roller-bar is hard to clean since the little end cap doesn’t come off like the original, and it frays quite a bit with dust sticking to the bristles. Other than that, everything else in this kit is fantastic. Extra filters and “whiskers” for the Shark IQ XL that I have. I feel like there should be more than one roller bar in the kit, though.
-
Nanaki
> 3 dayI was able to use everything in this kit on our robot except the roller brush. As another commenter stated, the rubber pads/brushes are too long (could be the angle its cut I dont know) I set it in the robot and day one it refused to run, until I swapped back to the original. Trial and error, Its still worth the money imho for the filter replacements. Me being the terrible owner that never cleaned the base filter.
-
Dr. Pascale Smith
> 3 dayHas ever thing you need for your vac.