anidees Aluminum Pi case for Raspberry Pi 4 Model B – Black(AI-PI4-BB)

(200 Reviews)

Price
$23.94

None
Quantity
(20000 available )

Total Price
Share
41 Ratings
18
9
5
4
5
Reviews
  • LukasM

    Greater than one week

    Solid build, everything fits correctly. Looks great on the desk.

  • Andrew

    > 3 day

    Very happy with the case as it fit the GPS hat perfectly, and the internal GPS antenna still works through the Perspex top. Wifi signal is reduced based on the direction of the signal going through the aluminium or Perspex.

  • Rocquen72

    > 3 day

    Pour dissiper la chaleur émise par les composants du Raspberry 4, jai équipé la carte de dissipateurs passif dun ventilateur Pimoroni, et je lai installé dans ce boitier en aluminium modèle haut parfaitement adapté. Après une mise à jour du firmware, plus aucun problème de performances.

  • Paul

    > 3 day

    works well with display hats. runs hot. if youre going to spend this much money, just spend 10 bucks more and get the pro version with the heat sync. bottom line its nice but i would not buy it again because of the cost. pros: - well built - solid construction - clear glass cons: - expensive - hot

  • Adelle Lang

    > 3 day

    Purchased this case to work with the Raspbeery Pi Sensehat. Unfortunately the case does not allow for easy mounting with the hat.

  • David L

    > 3 day

    This is a nice metal case for the PI 4b. However, I had two issues with the case: 1. There is no thermal conduction designed into the case to passively disspate heat from CPU, GPU and memory chips. It also does not include heat sinks. 2. You screw down the PI first into the case. This makes it very difficult to align the pins of the PI and a HAT and press it on to the PI. With a HAT installed it makes heat dissipation inside the case even more of an issue.

  • Zongo

    > 3 day

    Sehr schick, mit Platz für Kühlkörper.

  • Brian

    Greater than one week

    This case is well built, great design and has plenty of room for most hats.

  • K. Reiss

    > 3 day

    Im using this with the Yahboom Raspberry Pi RGB Cooling fan with the optional LCD display, and it fits perfectly. The display is easy to read, through the transparent cover. (https://www.amazon.com/Yahboom-Intelligent-Temperature-Programmable-Light(Quiet)/dp/B085RMLFCL/ref=sr_1_2?crid=M7GXNXMAF56Q&dchild=1&keywords=yahboom+raspberry+pi+rgb+cooling+hat&qid=1593647004&sprefix=yah+boom+ra%2Caps%2C174&sr=8-2 It is a bit tricky to get the brass stands for the cooler installed into the corners of the case, but I found a socket that worked and was able to put them in easily. If you are just using the case, you can use the Allen wrench and screws provided, and then installation would be fairly easy. I have not tried, but I believe other HATs like the senseHAT would work. I have tried the GeekPi Low Profile Ice Cooler, and it will fit with the fan removed, and it works just fine for normal operations as a passive cooler.

  • ShiningSquirrel

    > 3 day

    This is a very well made case, very sturdy and looks fantastic! I used it for a brand new Pi 4 and added a Yahboom Raspberry Pi 4B 3B+ 3B Cooling Fan Intelligent Temperature Control I2C OLED Display Programmable RGB Light to it. The case held both perfectly and looked great with the internal lighting. If you want a real classy looking Raspberry Pi project, this case with the Yahboom hat is a great combination.

11

Aluminum Pi case

The Uni-body Aluminium case protects your Raspberry Pi from damage and also cool as thermal conduction.

22

Easy Installation

Aluminum casing with cutouts for GPIO / Camera / DSI display cable

33

See through Acrylic Top lid

5mm thickness top cover to show off the system

2121

More Possibility inside

21mm space between the PI4 board and the top cover.

44

55

66

Thermal Efficiency

3 mm additional spacer to get better thermal solution. whether you have active or passive thermal solution on your Raspberry pi.

Aluminium Craft

High Quality Aluminum material with Noise-Absorbing Feet.

In the Box

Raspberry Pi 4 board is not included.

1 2 3 4 5 6
Extra High Pi4 case Black Extra High Pi4 case Silver Pi4 case Black Pi4 case Silver Heat Sinks Pi4 Case Black Heat Sinks Pi4 Case Silver
Case Style Extra High Extra High Standard Standard Heat sink Heat sink
Color Black SIlver Black SIlver Black SIlver
Dimension(inch) 3.62 x 2.64 x 1.87 3.62 x 2.64 x 1.87 3.62 x 2.64 x 1.46 3.62 x 2.64 x 1.46 3.62 x 2.65 x 1.56 3.62 x 3.62 x 2.65 x 1.562.65 x 1.56in
Board Support Pi 4 Model B Pi 4 Model B Pi 4 Model B Pi 4 Model B Pi 4 Model B Pi 4 Model B
Weight 0.41lb/180g 0.41lb/180g 0.32lb/145g 0.32lb/145g 0.29lb/130g 0.29lb/130g
Material Aluminum, Acrylic, Rubber Aluminum, Acrylic, Rubber Aluminum, Acrylic, Rubber Aluminum, Acrylic, Rubber Aluminum, Acrylic, Rubber, ABS 94V0 Aluminum, Acrylic, Rubber, ABS 94V0
Model No AI-PI4-BB-H AI-PI4-SG-H AI-PI4-BB AI-PI4-SG AI-PI4-BB-PRO AI-PI4-SG-PRO
Spacer for top cover
Support Optional 25/30 fan none none none none
Sense/PoE HAT Support Need 4/40 pin extra tall Header for PoE HAT Need 4/40 pin extra tall Header for PoE HAT

Related products

Shop
( 1057 Reviews )
Top Selling Products