Antec NX410 ATX Mid-Tower Case, Tempered Glass Side Panel, Full Side View, Pre-Installed 2 x 140mm in Front & 1 x 120 mm ARGB Fans in Rear (White) (9734088000)

Doesnt have the build quality of Zalman, doesnt have the versatility of Montech, doesnt really keep up with competitors in this price range at all. Build quality reminds me of a $40 case. Flimsy rolled steel riveted together with minimal bends and no modern feature design. The thing that got me the most though was the fans. Theyre not ARGB, theyre ARGB. Theres no controller, or possibility to connect one. Theres just a random 2 pin wire coming out of the 120mm that takes up your reset switch. And if the rest arent daisy chained into its molex fed connection, they dont work (at all, not just RGB)

I swapped the fans with Thermalright to match the CPU cooler. The stock fans are OK but they are a tad bit noisy. Also the first fan has the RGB controller in it so you cant sync it to other RGB in your case. The button just cycles between the available patterns programmed into the first of the 3 fans. The case itself is exquisite though. Easy mounting, good enough spots for cable management and easy to disassemble. Super quiet now and of course it has great air flow with the mesh front.

Although the dimensions of the case were listed, i did not expect such a TALL case, especially since it is advertised as a Mid-Tower Case! Nonetheless, the case looks modern, and was quite easy to build in. My only gripe was with the PCI-e brackets, as i found it a little difficult to screw in my GPU, because of the mechanism used. PLEASE NOTE: the included RGB fans are powered via the Molex connector, and therefore run at full speed, so i decided to go with white LED PWM fans, as i prefer to have control over the speed and noise level of the fans.

You can’t change the color of the fans. It’s just constant rainbow flashing. I tried everything and there is just a button to slightly change the speed of the pulsing. I bought replacement fans. Other than that it’s awesome. The glass is nice and the door lifts off really easy when you want it off. Plenty of room and the magnetic mesh is great for clean off dust. Also comes with extra parts and back slot covers.

This case is great for what you pay for. You get 3 rgb fans and a removable glass side panel. They Hard-drive cage is also very well made.

Overall this is a very nice case. My son wanted to move his PC into a bigger case for better cooling and we wanted to have room for a full size CPU cooler so we bought this case mainly because it was a cheap option and he liked the looks. We were very pleasantly surprised with the case and the overall quality. First, the side panel uses magnets to close which is great. Very easy to open and close when need to access the components but seems secure even when moving the PC. Also, once the door is open it very easily lifts off the hinges making full removal of the side panel extremely easy. The fans come preconfigured to move air from the front to the back which does a great job of moving air over the RAM, CPU and GPU to help with cooling out of the box. There is great cable management, with cutouts all around the motherboard so you can route cables behind and have the emerge exactly where you need to connect them. There is a full shroud at the bottom of the case to conceal the power supply and drives. The overall look is clean.

I did not like how the rear fan was required for the RGB to work . otherwise its a nice case.

amazing case great for its price too. This is prolly just me but look in the case for the screws when building your pc. almost had a panic attack because i thought i didnt receive them

i bought this case for a mid range budget build, so price and compatibility mattered a lot. Lets start with the cons. The description lied about being able to fit a 280mm radiator on the top, so i had to place my rad on the front of the case, which then started affecting my GPU temps. 3 weeks after the build i finally fixed the GPU temps with a bunch of tweaking with my GPU, CPU, and case fan settings. the holes for mobo standoffs were mostly all poorly placed. the fans that came with the case had to be thrown out because they were only compatible with MOLEX connectors and not 3/4 pin. but enough with the cons and lets get to the pros. This case looks real slick with or without the included fans. theres plenty of work room in the front and back sides of the case. the airflow is pretty decent as well, lots of mesh, although if you take the dust cover off the top fans it can definitely help them breathe. overall a decent case, with some dumb flaws. im happy with it for the most part but in all honesty i would not have bought it if i knew it wouldnt fit my radiator on the top of the case.

I just built an awesome budget gaming rig with this great case and it looks so damn fresh! I stress that this case is for budget rigs so Im talking low powered CPUs and GPUs such as the 65w i5-10400f cpu and a GTX 970 4gb gpu Im using on a B560 motherboard (3600mhz ram speed in XMP with the i5-10400f is a bonus!). Cons: 1) The included Antec case fans appear to be proprietized with the front panel switch so swapping out or adding more fans could be cumbersome. 2) Theres no fan speed controller or any compatibility from the included fans to plug into motherboard fan headers so the included Antec fans will be running at the same speed all the time. 3) I had trouble figuring out why I couldnt restart my PC from Windows 10 without having to hit the front panel power switch so I discovered that unplugging the HDD LED headers from my motherboard resolved this issue. This is fine if you dont need to use the front panel HDD LEDs but plan on using the fan LED switch on the front panel to change the fan RGB patterns and colors on the included Antec case fans. This is controlled by the Reset switch header wired to the rear fan and powered by your PSUs molex cable. Pros: 1) The one speed Antec case fans came properly pre-installed and are actually quite efficient under all my component loads. When idle, my motherboard keeps under 27c, i5-10400f keeps under 28c (using a Deepcool Gammax 400 cooler) and I dont really notice fan noise. When gaming, my GTX 970 stays under 78c max and the 10400f under 60c max while cpu fan noise is also tolerable. I dont really need to use any more fans to keep my budget PC cool. 2) The fan LED switch and RGB effects work beautifully. A simply push of the button and I get a different fan light show or color. Saves you time and windows memory from opening up an app and go through several clicks. 3) The swinging tempered glass door can easily be removed by simply lifting it from the latches. 4) It s only $50! This Antec case is in line with the front mesh airflow trend. The compact shape gives it a deceptive look of a micro ATX case yet the vertical design is a perfect fit for ATX boards. The space for the PSU and cable management scheme in the back panel is decent. The overall build quality and material isnt that shabby. It just looks simple, clean, and unique. Amazing value for an amazing budget case here in 2021!