Antec NX410 ATX Mid-Tower Case, Tempered Glass Side Panel, Full Side View, Pre-Installed 2 x 140mm in Front & 1 x 120 mm ARGB Fans in Rear (White) (9734088000)

I cant believe I got this case for $60. Worth every penny.

Im rebuilding my old PC for my step kiddo for Christmas. I didnt want to break the bank and I got this case for $60ish on a lightning deal. Its great for that price. It comes with two 140mm fans in the front and a 120mm exhaust. The RGB is controlled from the reset switch on the front panel. The MB on this build does not have RGB, so that was a must for me. I guess they just run on full blast all the time, but theyre not overly noisy. I like the magnetic swinging glass door for easy access if necessary. The only other PC Ive built was my personal rig in a Lian Li O11 and you really just cant compare them. This Antec wasnt bad to build in. Cable management isnt as easy but I got it looking clean at the end of the day and I think the kiddo will be happy on Christmas! (Plastic is not removed in the pics so he can have that satisfying peel)

Excellent for the price and it includes the RGB fans.

Doesnt have the build quality of Zalman, doesnt have the versatility of Montech, doesnt really keep up with competitors in this price range at all. Build quality reminds me of a $40 case. Flimsy rolled steel riveted together with minimal bends and no modern feature design. The thing that got me the most though was the fans. Theyre not ARGB, theyre ARGB. Theres no controller, or possibility to connect one. Theres just a random 2 pin wire coming out of the 120mm that takes up your reset switch. And if the rest arent daisy chained into its molex fed connection, they dont work (at all, not just RGB)

This was an easy build and it looks great, the cascading colors and ventilation are very good. My micro atx board needed an extension for the 24pin power, but that was no big deal as there was one included with the case.

Its inexpensive, but more than a few issues which prevents me from recommending this case (the antec NX410). The good news is that the tempered glass side panel is hinged and easy to take off and put back on without using any tools. And the case DOES appear to have some decent airflow (although havent done any stress testing of my i5-13600K cpu). As for the bad points, firstly, many of the standoffs were not screwed in all the way, and that caused the holes in the motherboard not to line up precisely enough with the standoffs to screw in ALL the standoffs. It took a lot of screwing in SOME of the standoffs, and unscrewing others, to get the holes to line up. Secondly, the rear fan comes pre-installed, but you will have to UN-install it to be able to get your motherboard in, and then reinstall it. Next, the case fans just run at full blast the whole time, as they are not controlled by the motherboard. Oh, those case fans get their power from a molex cable, and they dont include any sata-to-molex power adapter. So you will either have to plug a molex cable in to your power supply (meaning having one more cable coming out of your power supply and adding to cable clutter), or buy a sata-to-molex cable adapter. Worse yet, the molex connector is very low quality, and mine basically broke the instant I tried connecting it to the molex cable out of the PSU. Sticking with issues on the cable-side of the case, its confusing as to where you would put a second SSD (if you are already using two X 3.5 HD Drives like I am). Making matters worse, on the Antec website, clicking the link for the manual for this case results in a 403 error. So you are on your own trying to figure out where things go. Judging by the photos of OTHER Antec cases, it appears that Antec expects you to mount any other SSDs in a way that would block some of the holes where cables are supposed to pass through (mainly, the 24-pin motherboard power cable). Airflow has been sacrificed by the fact that the bottom four inches of the front panel is solid plastic, as the mesh doesnt extend all the way to the bottom. Antec says you can fit a 360mm radiator in the front, but I dont know if it makes sense to do that since a significant portion of it will be blocked off by the solid plastic part of the front panel. Likewise, you could in theory put another fan in the front, but again, the solid plastic part of the front panel would block direct airflow. Now, there ARE holes on the top of the PSU shroud, and you COULD in theory put a fan on top of the PSU shroud that would blow air on to your GPU. But the only air holes in the PSU shroud are on the bottom of the case, so any air coming in would be heated up by the PSU. They could have put holes on the side of the case bringing fresh air in to the PSU shroud, but they didnt. And since the bottom of the front panel is solid plastic (instead of mesh), airflow is restricted from the front, too. Overall, disappointed with this case, especially since a week before I bought an Asus Tuf Gaming GT301 Case for $75, while the Antec NX410 cost me $89. Will probably return this Antec case and get another Asus GT301 instead, even though the price of the GT301 has gone back up.

Great Case, nice and solid feel. The white is a great color, and has excellent airflow. 3RGB Fans that are included are surprisingly quiet. The case has room to work in nicely and has room for cable management. Great overall value for the money.

Good budget case. Decent cable management tie points. Good fit and finish. Just look at your product title, this only comes with 1 (rear mounted) 120mm fan. The preinstalled 2x 140 mm front fans are just basic fans, no RGB.

It came as expected

Easy to build in and have good air flow.