ARCTIC MX-4 (incl. Spatula, 8 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
J Lines
> 3 dayComes out a bit fast and is a little stringy after dispensing, but its non metallic and cleaned up with alchohol.
-
TurretCorruption
> 3 dayI had to do a repair on my switch lite. Right analog stick was broken, so of course the only way to fix that was to do a full teardown if the system, including the removal of the heat sink on the cpu. I specifically chose this thermal paste because I wanted to avoid any mishaps. Gallium based thermal pastes can easily destroy a whole board, so this product was an easy choice.
-
Dom
> 3 dayLe top comme dhab.
-
Ivan Nedyalkov
> 3 dayThe paste is good. It is easy to spread. I am using it on my Lenovo Thinkstation P700, to change the old paste. The temperatures are low - between 35 - 38 in idle mode (Internet browsing, working, watching movies and other unloaded activities). But if you need to lower the temperature of the CPU with 5 grad, you need Thermal Grizzly Kryonaut.
-
VB
> 3 dayThis worked great. PS4 Pro sounded like a jet engine and was always running hot. Cleaned it up, removed the old paste and added this thermal paste (easy to use and easy to clean up), and PS4 Pro is super quiet and running great. Highly recommend if your PS4 is running hot and loud. Saved money on not having to send it somewhere to get fixed or replaced.
-
Julian
> 3 dayLo aplique a mi hp omen y me da muy buenas temperaturas
-
Andre Pillas
Greater than one weekI recently repasted my acer nitro 2018 with this and now CPU temps are at a steady 38-40 at idle and 70-80 while gaming for a few hrs already.
-
Montaña
> 3 dayBien
-
Pilar Sànchez Montañès
> 3 dayMuy facil de usar
-
sosassy5
> 3 dayThis thermal paste is very easy to use, even for a novice like myself. So far it is doing its job. My PC is running much better and smoother.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
