Astro EUROHV105 EuroPro Forged HVLP Spray Gun with 1.5mm Nozzle and Plastic Cup

Well i purchased this gun in December of 2016 and it was working great but now the gun has a problem where it wont stop spraying air from the cap and the gun is cleaned after every use. It looks like the poor quality needle is worn out. I guess you get what you pay for

At first I had my doubts, bc I was using the cheapest clearcoat I could find with my 30 yr old hvlp devilbiss flg gun. It would not lay down smooth even with a 1.4 tip and thinned 20%. So then I got this, and used the same paint with slow reducer and slow activator. This thing lays out clearcoat like glass! I think bc its high efficiency is why I can spray as low as 15psi...thats not a typo, 15 psi and it atomizes as good as it does at 27psi. It even atomizes ok as low as 10psi! The only difference is way less overspray at the lower pressures. The spray pattern is super wide as well. (with higher pressure). The atomization of this gun is simply incredible! And it is so easy to clean. What I do is disconnect the air then open up the trigger and spray some carb cleaner through the gun until it begins running out clear. then I take it apart and do the final cleaning. I also have diaphragm type regulator, the cheapies dont cut it for me. I used to hate painting, now I love it! :-)

Great atomization, works extremely well. Im an amateur, and used this gun for epoxy primer, urethane color coat including microflake (.004), and urethane clear coat. Excellent results with all. The only defects in the job were due to my own learning curve.

This spray gun works really good. It has a nice spray pattern and it atomizes paint really good. The quality of this unit is nice, and I think it will last a long time. I would definitely recommend this gun to anyone.

Very nice for the price !

I dislike everything on this spray gun to much money spend on it only used once and i first I sprayed i switch to my old spray gun waste of time and money

This is a great gun that I have used several times now - nothing like the cheap chinese guns that fall apart in a few hours. Works perfectly after cleaning. I advise however that you make sure to filter your paint before pouring it into the cup or you will clog the small filter at the base of the cup very quickly.I am spraying house latex paint that has been thinned with water about 30%. It will not spray unthinned latex well.

Good

Bought this to replace the Porter Cable one I bought years ago I lost in a move. Never really worked as well. Gave it a shot with several different laquers but it never sprayed heavy enough even with the needle wide opeb

Was skeptical of it because of price and no real reviews! Few parts easy to clean up good quality spray gun. I have used sata, devibiss, Sharpe, and yes the ever so cheap hb guns but in my opinion the painter and his experience makes all the difference. This gun worked perfectly withmy small air compressor due to its low air consumption and laid down base and cheap clear beautifully! (Didnt even have to cut and buff) in my opinion best gun for the money and perfect for do it yourself er! Only flaw is cup filter has plastic filter that inserts which has tab which makes contact with fluid needle and make it stick open ruining a good paint job.....cut off tab and every thing will work properly! Save yourself the time of reviewing and comparing other guns and prices BUY THIS GUN!