Authentic Capricorn Bowden PTFE Tubing XS Series 1M for 1.75mm Filament with PTFE Teflon Tube Cutter, 2X PC4-M6 Extruder Fitting, 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/CR-10 3D Printers
-
Jerry Fadel
> 3 dayMajor upgrade to the low-end budget tubing that came with our 3d printer
-
Sky
> 3 dayI just needed a fitting and a small section of tube, this kit saved me money and had the cutter. Nice!
-
joe m
> 3 dayGood quality, fits the 1.75mm filament much tighter, allowing for better control of hot end extrusion. The little flush cutter tool is super helpful too. A necessary and affordable upgrade, instantaneous quality improvement.
-
Insight
> 3 dayWorks As Advertised
-
Frank
> 3 dayWorks as advertised and was easy to install as well. A great and simple upgrade for increased realizability. Included tube cutter worked just fine and I still had tubing left over for replacement use down the line.
-
GoEagle
> 3 dayCapricorn Bowden PTFE tubing is a nice upgrade with much better connectors.
-
Mickey Rivera
> 3 dayAfter being fooled into buying knock offs, this is the real deal from this seller!!!
-
NW
> 3 dayI have had to switch back to my old tubing. This internal diameter is too small. It was unable to push the filament through properly and caused my prints to turn out bad. I could feel the resistance when I tried to push the filament through by hand. Once I switched back, prints came out good again.
-
nick
> 3 dayWorks like a charm! good product and good customer service
-
MrFW190
> 3 dayNot quite enough length to make 2 tubes so I can have a spare but it definitely improved my print quality a little bit, especially for flexible filaments since those notoriously don’t so well with Bowden setups. Mine clogged after a few weeks because some of the filament I use isn’t quite 1.75mm enough in its tolerance and just got stuck. So that tells me this tube definitely gets rid of some of the wobbling and bunching up before your plastic gets to the hot end
Product description：
Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flexible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print.
|
|
|
|
|---|---|---|
|
Capricorn Premium XS Bowden imported Teflon tube, which is specially developed for 1.75mm consumables, has a very precise inner diameter. The shape and inner diameter of the height are consistent, the diameter is consistent and perfectly round, to ensure smooth lubrication of the wire, the inner diameter of 1.9mm is suitable for large and uniform filaments |
Made of PTFE resin imported from Japan, the most slippery substance known to mankind is slightly softer than ordinary PTFE, more flexible, heat-resistant, moisture-resistant, non-sticky on the surface, wear-resistant and corrosion-resistant.Makes the inner wall extremely smooth, and the extrusion efficiency is faster and better |
High-quality accessories, strong applicability Creative 3D selected imported Teflon tubes, high quality, low loss rate, suitable for all models of Creative 3D |
|
|
|
|
|
|
|---|---|---|---|---|---|
| Auto Bed Leveling Kit | Hotend Kit | Magnetic Build Surface | Glass Bed | Bowden PTFE Tubing | |
| Compatible Models | Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Max, Ender 5 Pro, Ender 5, CR 10 | Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3S | Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 3 S1, CR 20, CR 20 Pro | Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro | Ender-3 Series, Ender-5 Series, CR-10 Series |