Authentic Capricorn Bowden PTFE Tubing XS Series 1M for 1.75mm Filament with PTFE Teflon Tube Cutter, 2X PC4-M6 Extruder Fitting, 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/CR-10 3D Printers
-
steve
> 3 daythis has made my FLSUN printer a lot better what a great choice im super happy it will make your better too. its worth the purchase.
-
Jesse
> 3 dayGives you alot 3 times worth and works good
-
Kim Williams
Greater than one weekIf you are going to run a Bowden extruder then Capricorn is the only Tubing you should be running. And ensure you are using the correct fittings on both ends (hotted and extruder. This really takes the slop out of the filament feed. The other stock tubing is a bit loose and may cause some retraction issues. Capricorn is perfectly sized and actually helps reduce retraction issues.
-
Jim Perkin
> 3 dayAwesome!
-
Cody Brown
> 3 dayCapricorn is hands down the best name in printing parts. The accuracy of this bowden is amazing, and it is used by most professionals.
-
J. Lipham
> 3 dayHot end leaked , to big a mess to clean, drop in replacement for the stock unit.. Be sure to check the tube installation before using ..
-
Miranda McHenry
> 3 dayInstalled the new tube and connectors and the printer runs like a charm again! The tube is super smooth and sturdy. Shipping was fast too. Thank you.
-
raymond schilke
Greater than one weekAfter 7 successful months of 24/7 printing with my CR6 SE I started to get some prints that were inconsistent with layer tightness. I saw everybody touting the Capricorn Bowden tubes and thought how could a tube matter. I dismissed these people as lemmings just following the rest of the crowd. I broke down and bought this kit and installed it and VIOLA!! I am now a lemming ready to walk off the cliff because my prints are better than ever. I will not however worry about moisture in my materials........maybe. This product is a definite upgrade. It arrived very fast as well.
-
Douglas E. Ballard
> 3 dayThis company makes good stuff. I recommend them.
-
NW
> 3 dayI have had to switch back to my old tubing. This internal diameter is too small. It was unable to push the filament through properly and caused my prints to turn out bad. I could feel the resistance when I tried to push the filament through by hand. Once I switched back, prints came out good again.
Product description：
Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flexible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print.
|
|
|
|
|---|---|---|
|
Capricorn Premium XS Bowden imported Teflon tube, which is specially developed for 1.75mm consumables, has a very precise inner diameter. The shape and inner diameter of the height are consistent, the diameter is consistent and perfectly round, to ensure smooth lubrication of the wire, the inner diameter of 1.9mm is suitable for large and uniform filaments |
Made of PTFE resin imported from Japan, the most slippery substance known to mankind is slightly softer than ordinary PTFE, more flexible, heat-resistant, moisture-resistant, non-sticky on the surface, wear-resistant and corrosion-resistant.Makes the inner wall extremely smooth, and the extrusion efficiency is faster and better |
High-quality accessories, strong applicability Creative 3D selected imported Teflon tubes, high quality, low loss rate, suitable for all models of Creative 3D |
|
|
|
|
|
|
|---|---|---|---|---|---|
| Auto Bed Leveling Kit | Hotend Kit | Magnetic Build Surface | Glass Bed | Bowden PTFE Tubing | |
| Compatible Models | Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Max, Ender 5 Pro, Ender 5, CR 10 | Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3S | Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 3 S1, CR 20, CR 20 Pro | Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro | Ender-3 Series, Ender-5 Series, CR-10 Series |