Bearing Buddy Chrome Bearing Protectors (1.980) With Bras - Pair

(1573 Reviews)

Price
$29.99

Quantity
(10000 available )

Total Price
Share
123 Ratings
109
6
2
3
3
Reviews
  • Raymond K. Poplar

    > 24 hour

    I have used these on every trailer I have had. These are well priced and easy to install.

  • mush

    > 24 hour

    Fit snug works great

  • Franklin Isbell

    > 24 hour

    Now it is a whole lot easier to grease my bearings in my boat trailer. Works great and easy to install.

  • Steve

    > 24 hour

    Arrived fast. Easy to.install.

  • Patricia L Dougherty

    > 24 hour

    If you are towing anything your wheels have to be fully greased and protected. These do the job.

  • ccarl03

    > 24 hour

    Ive always used these on my boat trailers. Changing bearings is a pain, this is cheap insurance. Real simple to use, just dont over-fill or you may loose one on the highway!

  • LOTF74

    > 24 hour

    easy to use

  • joe

    > 24 hour

    does not leak grease have used this product on my first boat trailer and every trailer I have had since 1970 never had a problem with any one of them and never had a bearing burn off on the side of the road works well with brakes on trailer if you do not try to overfill the cup. Have purchased 16 sets for work trailers over last 50 years

  • COHwy9

    > 24 hour

    After smoking the bearings on a trailer on a recent trip to the back country, I realize that that is an experience I never want to repeat. After getting back from the terrible experience, I bought these to add to my trailer. Some tip from my experience adding these: A) It is easy to remove your old bearing shrowd and tap these on with a rubber mallet B) Take the time to remove the bearings and pack them with new grease before adding these. C) Make sure you have a grease gun with a large reservoir. Once you add these you will need to pump a ton of grease into the hub in order that the spring plate on these starts to see positive pressure. D) The rubber cap is a little cheap and has come off the trailer. Had to order a new one. Not a big enough issue to ding these.

  • Repete

    > 24 hour

    Excellent.

Bearing Buddy’s premium quality chrome protectors are real easy to install and give perfect grip and cover with continuous enhanced lubrication to save you a peace of mind while on road or in water.

Bearing Buddies for Boat Trailers

Trailering, even a short distance, heats the hubs. When the wheels are submerged during launching, the hubs suddenly cool and the air inside the unprotected hubs contracts, forming a vacuum which draws in water through the rear seals. There is no such thing as a rotating seal that stays perfect. Water and grit thus drawn into the hubs relentlessly destroy bearings. When properly installed and maintained, marine Bearing Buddy prevents wheel bearing system failure and eliminates bearing repacking. Boat trailer wheels can be completely submerged.

Utility Equipment, ATV, Horse, Camping, and Other Occasional used Trailers

These trailers, because they are not used regularly, are also subject to bearing corrosion and failure from condensation moisture from air sucked into hot hubs as they cool. Moisture stays in the hubs causing rust and pitting until they are reheated when the trailer is used again.

On any vehicle, protecting your wheel bearings from dirt, dust, water, salt, sand and other contaminants is critical, so when it comes to using grease caps, you don"t have much of a choice. That"s their job. You either use them and your wheel bearings will remain useful, or you don"t, and your wheel bearings wear out in a hurry.

Buy your bearings a buddy to play with, Click BUY NOW

Related products

Shop
( 1676 Reviews )
Top Selling Products