Cable Matters 2-Pack 16 AWG Right Angle Power Cord (Power Cable) 6 Feet (NEMA 5-15P to Angled IEC C13)

In my opinion, ALL, power cords for ALL devices requiring one of this kind should be ANGLED! It makes things so much easier not having a giant cord sticking out of the back of a device. I used this one for a audio mixer on my desk; the power cord that came with the mixer stuck out a good five or six inches which made it impossible to seat the mixer on my desk flush with the wall my desk is set up against. But now, my audio mixer is nearly flush with my wall and it now sits perfectly on my desk. ALL. POWER. CORDS. SHOULD. BE. ANGLED.

These cables are heavy duty. Needed longer cables to power my powered recliner and sofa. The cables are definitely an upgrade to the thinner shorter cables that came with the furniture. I like the angles connection since it doesnt stick out from the back of the furniture. Of course they work with normal computer connectors.

I have an old Sony analog oscilloscope that I occasionally drag out. It has plastic feet on the back so you can stand it up on the floor, which is nice when you have to lug it out to a piece of equipment thats low to the ground (or when you run out of bench space, like I always do). Its at that point that you realize a standard power cable sticks out far enough to prevent the scope from sitting flat on its feet. You then either prop it up on a couple of blocks of wood and hope it doesnt tip over, or you spend an eternity cleaning off your bench like you should have in the first place. Or, you go on Amazon and order power cables where the cord exits from the side of the connector. That way, you can stand your scope on its legs, take the covers off, and find out why it has no trace (tarnished switches and a loose connector, in case youre wondering). You MIGHT even get it to work again, and then you can lug it around and test stuff with it, thus confirming that you are, in fact, a nerd with too many tools. But at least your scope will work.

Excellent product..

Decent price for a 90 degree cable.

I bought these for use with my powered monitors. The right angle really lowers the profile of the back panel of my speakers. Im very happy with them.

I use these in my Xlights control boxes, they fit perfectly.

I bought these for my Ender 3 printers, because straight cables stick out too far and get in the way. Ultimately I went with shorter 18 AWG cables because these are thick and longer than I needed. Theyre very thick and a little bit inflexible as a result, so I wouldnt buy these for a situation where 18 AWG cable is sufficient. But if you need 16 AWG, these are sturdy and well-built.

Needed 90 deg plugs for mt test equipment. The cord is very beefy a holding up extremely well. I would recommend this cord.

I wanted to move my printer to a new spot that wouldn’t work with the straight cord it came with. I found this right angle cord and picked it up. I liked that it’s 16 AWG. Others I saw were thinner and I didn’t know if they could handle my printer. This one worked perfectly.